Bubble proliferation in shock wave lithotripsy

• Published in: The Journal of the Acoustical Society of America 2007-05, Vol.121 (5_Supplement), p.3081-3081
• Main Authors: Pishchalnikov, Yuri A., McAteer, James A., Bailey, Michael R., Williams, James C., Sapozhnikov, Oleg A.
• Format: Article
• Language: English
• ISSN: 0001-4966; 1520-8524
• DOI: 10.1121/1.4781918

Stone breakage is less efficient when lithotripter shock waves (SWs) are delivered at 2 Hz compared to slower 0.5–1-Hz pulse repetition rates (PRFs). This correlates with increased number of transient cavitation bubbles observed along the SW path at fast PRF. The dynamics of this bubble proliferation throughout the bubble lifecycle is investigated in this report. Cavitation bubbles were studied in the free-field of a shock wave lithotripter using fine temporal and microscopic spatial resolution (high-speed camera Imacon-200). A typical cavitation bubble became visible (radius>10 μm) under the tensile phase of the lithotripter pulse, and at its first inertial collapse emitted a secondary SW and formed a micro-jet, which then could break up forming ∼25 micro-bubbles. Subsequent rebound and collapse of the parent bubble appeared to produce a further 40–120 daughter bubbles visible following the rebound. Preexisting bubbles hit by the lithotripter SW also formed micro-jets and broke up into micro-bubbles that grew and coalesced, producing irregular-shaped bubbles that, in turn, broke into micro-bubbles upon subsequent inertial collapse. A conventional NTSC-rate camcorder was used to track cavitation bubbles from pulse-to-pulse, showing that a single bubble can give rise to a cavitation cloud verifying high-speed video results. [Work supported by NIH-DK43881.]