Fully 3D-Printed Hydrogel Actuator for Jellyfish Soft Robots

• Published in: ECS journal of solid state science and technology 2021-03, Vol.10 (3), p.37002
• Main Authors: Takishima, Yuki, Yoshida, Kazunari, Khosla, Ajit, Kawakami, Masaru, Furukawa, Hidemitsu
• Format: Article
• Language: English
• ISSN: 2162-8769; 2162-8777
• DOI: 10.1149/2162-8777/abea5f

Recently, interest to develop soft robots that mimic flora and fauna in the natural environment has been growing in order to meet the demand for shortage in labor, working in hazardous environments, disaster management, health care and oceanography. Actuators that are made from soft materials, such as elastomers and hydrogels, are integral components of soft robots. Although, 3D printing is a versatile technique to fabricate prototypes, it is a well-known fact that 3D printing for soft materials is challenging. In this work, we present the fabrication and characterization of 3D-printed hydrogel soft actuator that mimics a jellyfish. The developed actuators consist of three parts; (1) Connector: which is the joint part between the main body of actuator and the inlet tube for air pressure, (2) Box: which is balloon-like inflation part and; (3) Base: which is connected to the Box. The results indicate that the normalized contraction ratio of the 3D-printed actuator is close value to that of moon jellyfish and is applicable to a jellyfish-mimic robot. Furthermore, it is observed that, the relationship between applied air pressure and injected volume is linear without balloon defects.