Submicron Surface Vibration Profiling Using Doppler Self-Mixing Techniques

• Published in: Advances in Optics 2014-07, Vol.2014 (2014), p.1-7
• Main Authors: Pereira, Tânia, Sequeira, Mariana, Vaz, Pedro, Tomé, Ana, Pereira, Helena C., Correia, Carlos, Cardoso, João
• Format: Article
• Language: English
• ISSN: 2356-6817; 2314-7741
• DOI: 10.1155/2014/576380

Doppler self-mixing laser probing techniques are often used for vibration measurement with very high accuracy. A novel optoelectronic probe solution is proposed, based on off-the-shelf components, with a direct reflection optical scheme for contactless characterization of the target’s movement. This probe was tested with two test bench apparatus that enhance its precision performance, with a linear actuator at low frequency (35 µm, 5–60 Hz), and its dynamics, with disc shaped transducers for small amplitude and high frequency (0.6 µm, 100–2500 Hz). The results, obtained from well-established signal processing methods for self-mixing Doppler signals, allowed the evaluation of vibration velocity and amplitudes with an average error of less than 10%. The impedance spectrum of piezoelectric (PZ) disc target revealed a maximum of impedance (around 1 kHz) for minimal Doppler shift. A bidimensional scan over the PZ disc surface allowed the categorization of the vibration mode (0, 1) and explained its deflection directions. The feasibility of a laser vibrometer based on self-mixing principles and supported by tailored electronics able to accurately measure submicron displacements was, thus, successfully demonstrated.