Mechanistic-Based Parametric Model for Predicting Rolling Resistance of Concrete Pavements

• Published in: Transportation research record 2019-07, Vol.2673 (7), p.341-350
• Main Authors: Balzarini, Danilo, Chatti, Karim, Zaabar, Imen, Butt, Ali A., Harvey, John T.
• Format: Article
• Language: English
• ISSN: 0361-1981; 2169-4052
• DOI: 10.1177/0361198119847611

The structural rolling resistance (SRR) is the component of rolling resistance that occurs because of the viscoelastic deformation of the pavement structure. In this paper, a simple model to calculate the energy dissipation as a result of the SRR on rigid pavements is developed for use in applications such as life cycle cost analysis and life cycle assessment. First, the energy dissipated by different vehicles was calculated on 12 concrete pavement sections using a fully mechanistic approach. Using the program DYNASLAB to simulate the vehicles moving along the pavement sections, the energy dissipation was calculated as the work done by the vehicle to overcome the slope seen by the wheels because of the pavement deformation. The results were then used to develop a simple and rapid-to-use model to predict the energy dissipation on any jointed concrete pavement. The model consists of a simple predictive function that can provide the value of the SRR energy dissipation given the mechanical properties of the pavement section (slab thickness and stiffness, modulus of subgrade reaction, subgrade damping coefficient, pavement geometry, and load transfer efficiency) and the loading conditions (speed and loads). The model was based on a sensitivity analysis that was used to select the optimal set of structural and environmental factors.