Buckling-Controlled Member for Improving the Ductile Behavior of Double-Layer Latticed Space Structures

• Published in: International journal of space structures 2023-09, Vol.38 (3), p.159-180
• Main Authors: Kheirollahi, Mohammad, Chenaghlou, Mohammad Reza, Abedi, Karim
• Format: Article
• Language: English
• ISSN: 0956-0599; 2059-8033
• DOI: 10.1177/09560599231161447

In this paper, a new buckling-controlled member (BCM) is introduced for use in space structures. This member is composed of four components; namely: the encasing, joints, core, and adjustable nuts. The core is intended to act as a structural element to resist the axial loads by its yielding under compression loading. The steel encasing is supposed to confine the steel core. Adjustable steel nuts on the steel core act as lateral bracings and are responsible for lateral load transmission between the encasing and core. The joints at the two ends of the supports of the member. Six experimental tests have been performed under compression load to show the efficiency of the new member. The test results reveal that the proposed member can provide the needed ductility and can delay the brittle buckling of the members. Also, the BCM is capable of considering buckling modes and controlling the plastic range. The experimental and numerical results have also been compared. Additional numerical evaluations have been carried out using finite element models, in which the effects of different parameters of the member have been investigated. The obtained results showed that the arrangement of inner elements is the main factor affecting ductility and postponing the buckling of the members. In the end, the effects of the BCMs on the overall behavior of four double-layer space structures have been studied. The obtained results of analyses indicated that the BCMs can enhance the strength and ductility of space structures, thereby reducing the risk of collapse. Also, the seismic collapse of the space structure was postponed.