Surface detail reproduction and dimensional accuracy of stone models: influence of disinfectant solutions and alginate impression materials

• Published in: Brazilian dental journal 2012, Vol.23 (4), p.417-421
• Main Authors: Guiraldo, Ricardo Danil, Borsato, Thaís Teixeira, Berger, Sandrine Bittencourt, Lopes, Murilo Baena, Gonini-Jr, Alcides, Sinhoreti, Mário Alexandre Coelho
• Format: Article
• Language: English
• ISSN: 0103-6440; 0103-6440
• DOI: 10.1590/S0103-64402012000400018

This study compared the surface detail reproduction and dimensional accuracy of stone models obtained from molds disinfected with 2% sodium hypochlorite, 2% chlorhexidine digluconate or 0.2% peracetic acid to models produced using molds which were not disinfected, with 3 alginate materials (Cavex ColorChange, Hydrogum 5 and Jeltrate Plus). The molds were prepared over matrix containing 20-, 50-, and 75-µm lines, performed under pressure with perforated metal tray. The molds were removed following gelation and either disinfected (using one of the solutions by spraying followed by storage in closed jars for 15 min) or not disinfected. The samples were divided into 12 groups (n=5). Molds were filled with dental gypsum Durone IV and 1 h after the start of the stone mixing the models were separated from the tray. Surface detail reproduction and dimensional accuracy were evaluated using optical microscopy on the 50-µm line with 25 mm in length, in accordance with the ISO 1563 standard. The dimensional accuracy results (%) were subjected to ANOVA. The 50 µm-line was completely reproduced by all alginate impression materials regardless of the disinfection procedure. There was no statistically significant difference in the mean values of dimensional accuracy in combinations between disinfectant procedure and alginate impression material (p=0.2130) or for independent factors. The disinfectant solutions and alginate materials used in this study are no factors of choice regarding the surface detail reproduction and dimensional accuracy of stone models. Este estudo comparou a reprodução de detalhes da superfície e alteração dimensional de modelos de gesso obtidos a partir de moldes desinfetados com hipoclorito de sódio 2%, digluconato de clorexidina 2%, ou ácido peracético 0,2% a modelos confeccionados utilizando moldes que não foram desinfetados com três alginatos (Cavex ColorChange, Hydrogum 5, Jeltrate Plus). Os moldes foram preparados sobre matriz contendo linhas de 20, 50 e 75 µm realizado sob pressão com moldeira de metal perfurada. Os moldes foram removidos após a geleificação e desinfetados (utilizando uma das soluções por pulverização, armazenados em frascos fechados durante 15 min) ou não desinfetados. Assim, as amostras foram divididas em 12 grupos (n=5). Os moldes foram preenchidos com gesso dental Durone IV e uma hora após a manipulação do gesso os modelos foram separados da moldeira. A reprodução de detalhes da superfície e a precisão dimensional foram av