Field testing CFD-based predictions of storage chamber gross solids separation efficiency

• Published in: Water science and technology 1999-05, Vol.39 (9), p.161-168
• Main Authors: Stovin, Virginia R., Saul, Adrian J., Drinkwater, Andrew, Clifforde, Ian
• Format: Article
• Language: English
• ISSN: 0273-1223; 1996-9732
• DOI: 10.2166/wst.1999.0467

The use of computational fluid dynamics-based techniques for predicting the gross solids and finely suspended solids separation performance of structures within urban drainage systems is becoming well established. This paper compares the result of simulated flow patterns and gross solids separation predictions with field measurements made in a full size storage chamber. The gross solids retention efficiency was measured for six different storage chambers in the field and simulations of these chambers were undertaken using the Fluent computational fluid dynamics software. Differences between the observed and simulated flow patterns are discussed. The simulated flow fields were used to estimate chamber efficiency using particle tracking. Efficiency results are presented as efficiency cusps, with efficiency plotted as a function of settling velocity. The cusp represents a range of efficiency values, and approaches to the estimation of an overall efficiency value from these cusps are briefly discussed. Estimates of total efficiency based on the observed settling velocity distribution differed from the measured values by an average of ±17%. However, estimates of steady flow efficiency were consistently higher than the observed values. The simulated efficiencies agreed with the field observations in identifying the most efficient configuration.