Numerical vibro-acoustic analysis of railway wheels with and without damping solutions

• Published in: Noise control engineering journal 2012-01, Vol.60 (4), p.458-472
• Main Authors: Merideno, Inaki, Nieto, Javier, Gil-Negrete, Nere, Landaberea, Aitor, Jon
• Format: Article
• Language: English
• ISSN: 0736-2501
• DOI: 10.3397/1.3701024

This paper presents a vibro-acoustic characterization of a railway wheel in the frequency domain with and without damping solutions. From a simple vibrational measure where modal damping ratios are calculated, the sound pressure at a certain distance from the railway wheel is predicted, avoiding time-consuming and expensive acoustic measurements. The approach is based on FEM (?nite element method) and makes use of the submodeling technique which consists of decoupling the calculation ?rst into a structural response, and then into the acoustic emission. This decoupling allows damping in the structure to be introduced in terms of modal damping ratios instead of Rayleigh damping, a commonly used approach that is, nonetheless, not very accurate. Due to the use of in?nite elements in the boundaries, the size of the acoustic mesh is reduced to an ellipsoid surrounding the structure, thus decreasing calcu¬lation time. The results are compared with experimental measurements with sat¬isfactory agreement. Thus, the approach described becomes a powerful tool to compare different damping treatments and to make a decision on which solution could be adopted in a particular application.