Gas sensing properties of individual SnO 2 nanowires and SnO 2 sol-gel nanocomposites

• Published in: Beilstein journal of nanotechnology 2019-07, Vol.10, p.1380-1390
• Main Authors: Shaposhnik, Alexey V, Shaposhnik, Dmitry A, Turishchev, Sergey Yu, Chuvenkova, Olga A, Ryabtsev, Stanislav V, Vasiliev, Alexey A, Vilanova, Xavier, Hernandez-Ramirez, Francisco, Morante, Joan R
• Format: Article
• Language: English
• ISSN: 2190-4286; 2190-4286
• DOI: 10.3762/bjnano.10.136

This work is an investigation of the properties of semiconductor materials based on metal oxides, their catalytic properties, and their application as gas sensors, which were shown to exhibit high sensitivity, stability, and selectivity to target gases. The aim of this work is the comparison of gas sensing properties of tin dioxide in the form of individual nanowires and nanopowders obtained by sol-gel synthesis. This comparison is necessary because the traditional synthesis procedures of small particle, metal oxide materials seem to be approaching their limit. Because of this, there is increasing interest in the fabrication of functional materials based on nanowires, i.e., quasi-one-dimensional objects. In this work, nanocrystalline tin dioxide samples with different morphology were synthesized. The gas-transport method was used for the fabrication of well-faceted wire-like crystals with diameters ranging between 15-100 nm. The sol-gel method allowed us to obtain fragile gels from powders with grain sizes of about 5 nm. By means of X-ray photoelectron spectroscopy (XPS) it was proven that the nanowires contain considerably smaller amounts of hydroxy groups compared to the nanopowders. This leads to a decrease in the parasitic sensitivity of the sensing materials to humidity. In addition, we demonstrated that the nanowires are characterized by a nearly single-crystalline structure, ensuring higher stability of the sensor response due to the unlikelihood of sample recrystallization. The results from the ammonia detection experiments showed that the ratio of the sensor response to the surface area exhibits similar values for both the individual nanowire and nanopowders-based sensor materials.