Microcellular PP/GF composites: Morphological, mechanical and fracture characterization

• Published in: Composites. Part A, Applied science and manufacturing Applied science and manufacturing, 2018-01, Vol.104, p.1-13
• Main Authors: Gómez-Monterde, J., Sánchez-Soto, M., Maspoch, M. Ll
• Format: Article
• Language: English
• Subjects: Compostos polimèrics; Enginyeria dels materials; Foamed materials; Foams; Fractura; Fracture; Fracture toughness; Injection moulding; Materials compostos; Materials escumosos; Polymer-matrix composites (PMCs); Polymeric composites; Àrees temàtiques de la UPC
• ISSN: 1359-835X; 1878-5840
• DOI: 10.1016/j.compositesa.2017.10.014

The aim of the present work is to analyze the morphology, mechanical properties and fracture behaviour of solid and foamed plates made of glass fiber-reinforced PP. The morphology exhibited a solid skin/foamed core structure, dependent on the foaming ratio. Simulation of the microcellular injection molding process with Moldex 3D® software provided a good approach to the experimental results. The flexural properties and impact resistance showed lower values as the apparent density decreased, but constant specific properties. The fracture characterization was carried out by determining the Crack Tip Opening Displacement (CTOD) at low strain rate, as well as the fracture toughness (KIc) at impact loading. Foamed specimens presented higher values of CTOD than the solid ones and higher as the foaming ratio increases, due to cells acting as crack arrestors by blunting the crack tip. However, the fracture toughness KIc decreased with decreasing the apparent density. Anisotropy due to fiber orientation was also observed. Fibers were aligned in the filling direction in the surface layers, while they were oriented in the transverse direction in the core. According to the amount of fibers oriented in one direction or another, different properties were obtained.