CFD Simulation of the Slot Jet Impingement Heat Transfer Process and Application to a Temperature Control System for Galvanizing Line of Metal Band

• Published in: Applied sciences 2021-01, Vol.11 (3), p.1149
• Main Authors: Cademartori, Stefano, Cravero, Carlo, Marini, Martino, Marsano, Davide
• Format: Article
• Language: English
• Subjects: CFD; Computational fluid dynamics; Configurations; Control systems; Cooling; Experiments; galvanization process; Galvanizing; Heat transfer; Jet impingement; Mathematical models; Numerical models; Reynolds number; Simulation; Temperature control; Turbulence models; Two dimensional models; Velocity; Viscosity
• ISSN: 2076-3417; 2076-3417
• DOI: 10.3390/app11031149

A CFD model to simulate the cooling technique trough slot jet impingement has been developed. Such a technique has been tested on an existing vertical galvanizing industrial line, which initially envisaged a round jet configuration, the subject of a previous work. Two different slot jet configurations have been simulated and compared to the pre-existing one, in order to provide design information for a possible new jet cooler after exploring different solutions. The numerical model has been appropriately calibrated and validated by comparing it with experimental measurements from a literature case. At first, a single slot jet configuration was simulated through a 2D model, then multi slot configurations were calculated using 3D models. Different turbulence models were compared to select the best candidate for the CFD approach. Finally, several configurations with different slots numbers and jet-wall distances were considered. It was possible to understand the physical mechanisms underlying this cooling technique and to be able to select the most promising configuration for the reference industrial cooling process.