Predicting the durability of zinc coatings based on laboratory and field tests

• Published in: E3S web of conferences 2019-01, Vol.121, p.1008
• Main Authors: Kovalev, Mark, Alekseeva, Ekaterina, Shaposhnikov, Nikita, Povyshev, Anton
• Format: Article
• Language: English
• ISSN: 2267-1242; 2267-1242
• DOI: 10.1051/e3sconf/201912101008

Galvanizing is one of the most common methods of corrosion protection. For the deposition of zinc coatings used such methods as gas-thermal deposition, thermal diffusion saturation in powder, hot-dip galvanizing, cladding, and galvanic precipitating during electrolysis. The hot-dip galvanizing is the most common method, which is used in construction, automotive and other industries. Paper presents the results of research of zinc coatings used in sea conditions. The aim of the work was to determine an acceleration factor by comparing the corrosion rate in laboratory conditions with the data from field tests. Laboratory studies were carried out in a salt fog chamber. Samples were periodically removed from chamber to build the dependence of the corrosion rate on the exposure time. Field tests were carried out at the exploitation area. Result of the work is a guide that allows to predict the corrosion rates of zinc coatings using laboratory tests. The advantage of this test method is shorter time of exposure in comparison with field test.