Thermal Modeling Approaches for a LiCoO2 Lithium-ion Battery—A Comparative Study with Experimental Validation

• Published in: Batteries (Basel) 2020-09, Vol.6 (3), p.40
• Main Authors: Paccha-Herrera, Edwin, Calderón-Muñoz, Williams R., Orchard, Marcos, Jaramillo, Francisco, Medjaher, Kamal
• Format: Article
• Language: English
• Subjects: ANSYS; CAD; Comparative studies; Computational fluid dynamics; Computer aided design; Computer simulation; Electric vehicles; Electronic devices; Errors; Free convection; Geometry; Heat conductivity; Heat generation; Heat transfer; Heat transfer coefficients; Lithium; Lithium compounds; Lithium-ion batteries; lithium-ion battery; lumped model; MSMD; natural convection; Parameter identification; Product safety; Rechargeable batteries; Studies; Temperature; Thermal analysis; thermal management; Thermodynamic properties; Three dimensional models
• ISSN: 2313-0105; 2313-0105
• DOI: 10.3390/batteries6030040

Temperature prediction of a battery plays a significant role in terms of energy efficiency and safety of electric vehicles, as well as several kinds of electric and electronic devices. In this regard, it is crucial to identify an adequate model to study the thermal behavior of a battery. This article reports a comparative study on thermal modeling approaches by using a LiCoO2 26650 lithium-ion battery, and provides a methodology to characterize electrothermal phenomena. Three approaches have been implemented numerically—a thermal lumped model, a 3D computational fluid dynamics model, and an electrochemical model based on Newman, Tiedemann, Gu and Kim formulation. The last two methods were solved using ANSYS Fluent software. Simulations were validated with experimental measurements of the cell surface temperature at constant current discharge and under a highway driving cycle. Results show that the three models are consistent with actual temperature measurements. The electrochemical method has the lower error at 0.5C. Nevertheless, this model provides the higher error ( 1.3∘C) at 1.5C, where the maximum temperature increase of the cell was 18.1∘C. Under the driving cycle, all the models are in the same order of error. Lumped model is suitable to simulate a wide range of battery operating conditions. Furthermore, this work was expanded to study heat generation, voltage and heat transfer coefficient under natural convection.