Dynamic compressive response of wrought and additive manufactured 304L stainless steels

• Main Authors: Nishida, Erik, Song, Bo, Maguire, Michael, Adams, David, Carroll, Jay, Wise, Jack, Bishop, Joseph, Palmer, Todd
• Format: Conference Proceeding
• Language: English
• Subjects: Austenitic stainless steels; Compressive properties; Coordination compounds; Dynamic mechanical properties; Mechanical analysis; Mechanical properties; Porosity; Residual stress; Stainless steel; Strain rate; Stress-strain curves; Stress-strain relationships; Tooling
• ISSN: 2100-014X; 2101-6275; 2100-014X
• DOI: 10.1051/epjconf/20159401001

Additive manufacturing (AM) technology has been developed to fabricate metal components that include complex prototype fabrication, small lot production, precision repair or feature addition, and tooling. However, the mechanical response of the AM materials is a concern to meet requirements for specific applications. Differences between AM materials as compared to wrought materials might be expected, due to possible differences in porosity (voids), grain size, and residual stress levels. When the AM materials are designed for impact applications, the dynamic mechanical properties in both compression and tension need to be fully characterized and understood for reliable designs. In this study, a 304L stainless steel was manufactured with AM technology. For comparison purposes, both the AM and wrought 304L stainless steels were dynamically characterized in compression Kolsky bar techniques. They dynamic compressive stress-strain curves were obtained and the strain rate effects were determined for both the AM and wrought 304L stainless steels. A comprehensive comparison of dynamic compressive response between the AM and wrought 304L stainless steels was performed. SAND2015-0993 C.