Two-Dimensional Tungsten Disulfide-Based Ethylene Glycol Nanofluids: Stability, Thermal Conductivity, and Rheological Properties

• Published in: Nanomaterials (Basel, Switzerland) Switzerland), 2020-07, Vol.10 (7), p.1340
• Main Authors: Shah, Syed Nadeem Abbas, Shahabuddin, Syed, Mohd Sabri, Mohd Faizul, Mohd Salleh, Mohd Faiz, Mohd Said, Suhana, Khedher, Khaled Mohamed, Sridewi, Nanthini
• Format: Article
• Language: English
• Subjects: Cetyltrimethylammonium bromide; Cooling; Critical temperature; Dimensional stability; dispersion stability; Electron microscopy; Ethylene; Ethylene glycol; Field emission microscopy; Field emission spectroscopy; Fluidity; Fluids; Fourier analysis; Fourier transforms; Graphene; Heat conductivity; Heat transfer; Infrared spectroscopy; Microscopy; Nanofluids; Nanomaterials; Nanoparticles; Nanowires; Newtonian fluids; Physical properties; Reduction; Researchers; Rheological properties; Rheology; Scanning electron microscopy; Shear flow; Shear rate; Sodium; Sodium dodecyl sulfate; Sodium dodecylbenzenesulfonate; Sodium lauryl sulfate; Surfactants; Thermal conductivity; Thermodynamic properties; Transmission electron microscopy; Tungsten; Tungsten disulfide; Viscoelasticity; Viscosity; X-ray diffraction; Yield stress; Zeta potential
• ISSN: 2079-4991; 2079-4991
• DOI: 10.3390/nano10071340

Developing stable nanofluids and improving their thermo-physical properties are highly important in heat transfer applications. In the present work, the stability, thermal conductivity, and rheological properties of tungsten disulphide (WS ) nanoparticles (NPs) with ethylene glycol (EG) were profoundly examined using a particle size analyzer, zeta-sizer, thermal property analyzer, rheometer, and pH measuring system. WS NPs were characterized by various techniques, such as XRD (X-Ray Diffraction), FTIR (Fourier Transform Infrared Spectroscopy), FESEM (Field emission scanning electron microscopy), and high-resolution transmission electron microscopy (HRTEM). The nanofluids were obtained with the two-step method by employing three volume concentrations (0.005%, 0.01%, and 0.02%) of WS . The influence of different surfactants (Sodium dodecyl sulphate (SDS), Sodium dodecylbenzenesulfonate (SDBS), Cetyltrimethylammonium bromide (CTAB)) with various volume concentrations (0.05-2%) on the measured properties has also been evaluated. Pristine WS /EG nanofluids exhibit low zeta potential values, i.e., -7.9 mV, -9.3 mV, and -5 mV, corresponding to 0.005%, 0.01%, and 0.02% nanofluid, respectively. However, the zeta potential surpassed the threshold (±30 mV) and the maximum values reached of -52 mV, -45 mV, and 42 mV for SDS, SDBS, and CTAB-containing nanofluids. This showed the successful adsorption of surfactants onto WS , which was also observed through the increased agglomerate size of up to 1720 nm. Concurrently, particularly for 0.05% SDS with 0.005% WS , thermal conductivity was enhanced by up to 4.5%, with a corresponding decrease in viscosity of up to 10.5% in a temperature range of (25-70 °C), as compared to EG. Conversely, the viscoelastic analysis has indicated considerable yield stress due to the presence of surfactants, while the pristine nanofluids exhibited enhanced fluidity over the entire tested deformation range. The shear flow behavior showed a transition from a non-Newtonian to a Newtonian fluid at a low shear rate of 10 s . Besides this, the temperature sweep analysis has shown a viscosity reduction in a range of temperatures (25-70 °C), with an indication of a critical temperature limit. However, owing to an anomalous reduction in the dynamic viscosity of up to 10.5% and an enhancement in the thermal conductivity of up to 6.9%, WS /EG nanofluids could be considered as a potential candidate for heat transfer applications.