The Early Age Hydration Products and Mechanical Properties of Cement Paste with Steel Slag Powder as Additive under Steam Curing Conditions

• Published in: Buildings (Basel) 2023-09, Vol.13 (9), p.2192
• Main Authors: Li, Baoliang, Lu, Xue, Huo, Binbin, Du, Yuheng, Liu, Yuyi, Cheng, Yongzhen, Liu, Zejun
• Format: Article
• Language: English
• Subjects: Acids; Cement; Cement hydration; Cement paste; Composite materials; compressive strength; Curing; Energy consumption; Gels; Hydrates; Hydration; Mechanical properties; Metal powders; microstructure; Particle size; Powders; Precast concrete; Reinforced concrete; Reinforcing steels; Slag; SSP; standard curing condition; Steam curing; steam curing condition; Steel production
• ISSN: 2075-5309; 2075-5309
• DOI: 10.3390/buildings13092192

To explore the feasibility of the application of steel slag powder (SSP) in steam-cured precast concrete, 0% and 20% SSP were used to replace cement and prepare cement paste, and the early age performance of steam-cured (80 °C for 7 h and 7 d) SSP-blended cement paste, including different types and amounts of hydrates, the microstructure and mechanical properties were investigated and compared with those of 28 d standard-cured SSP sample. The results show that SSP addition promotes the generation of laminar C-S-H gels and granular C-S-H gels after an initial 7 h steam curing. Further extending the lasting time of 80 °C steam curing to 7 days favors the production of hydrogarnet and crystalline C-S-H, of which the amount of formation of hydrogarnet in SSP composite cement paste is less and the particle size is smaller than those in the control sample. However, steam curing increases the gap between the number of hydrates formed in SSP-blended cement paste and the control paste. The delayed hydration effect of SSP on cement offsets the promoting effect of steam curing on the hydration of cement; in consequence, the incorporation of SSP seems to be detrimental to the hydration of steam-cured cement paste.