Comparative Study of Natural Radioactivity and Radiological Hazard Parameters of Various Imported Tiles Used for Decoration in Sudan

• Published in: Symmetry (Basel) 2018-12, Vol.10 (12), p.746
• Main Authors: Siddeeg, Saifeldin, Suliman, Mohamed, Ben Rebah, Faouzi, Mnif, Wissem, Ahmed, Amel, Salih, Isam
• Format: Article
• Language: English
• Subjects: ceramic tiles; Ceramics; Comparative studies; Dosage; Dwellings; Equivalence; gamma ray spectrometry; Natural radioactivity; Norms; Parameters; Potassium; Radiation; Radioactivity; radioactivity concentration; Radioisotopes; radiological hazards; Radium; Scientific imaging; Sensors; Software; Thorium; Thorium isotopes
• ISSN: 2073-8994; 2073-8994
• DOI: 10.3390/sym10120746

Various commercially imported ceramic materials used in the building of Sudanese dwellings were examined in order to determine their natural radioactivity and radiological hazard parameters. In this context, twenty-five different consignments were sampled and analyzed using (3″ × 3″) sodium iodide gamma spectrometry system NaI(Tl). The identified average activity concentrations of 238U, 232Th, and 40K were 183 ± 70, 51 ± 44, and 238 ± 77 Bq/kg dry-weights, respectively. A positive correlation between 238U and 232Th in the investigated samples was identified from the observed significant correlation (R2 = 0.8). Interestingly, a low Th/U ratio (~0.3) was recorded, which could be related to the systematic loss of thorium during the fabrication process. The measured activity concentrations for these radionuclides were comparable with the reported data obtained from similar materials used in other countries showing similarity in ceramic materials used in buildings. Five different radiation indices, such as the average radium equivalent (Raeq), the absorbed dose rate (D), the annual effective dose equivalent (AEDE), the external hazard index (Hex), and the radioactivity level index (lγ), which indicate hazardous radiation, were estimated from these measurements. The obtained results revealed average values of 274 ± 106 Bq/kg, 125 ± 48 nGy/h, 1.23 ± 0.48 mSv/y, 0.74 ± 0.29, and 0.94 ± 0.37, for Raeq, D, AEDE, Hex, and lγ, respectively. The mean values of Raeq and Hex were in good agreement with the international limits, while the means of D and lγ were higher than the universal values. Calculated AEDE in about 60% of the samples exceeded the universal limit of 1 mSv/y for the public exposure (maximum value of 2.16 mSv/y). The investigated parameters were in the same range for the majority of imported samples; however, they were slightly higher than the locally produced ceramic, highlighting the importance of monitoring imported materials for their radioactivity contents.