Impact of Placement of Aminopropyl Triethoxy Silane and Tetraethoxy Silicate on SSBR Chains: Analysis of Rolling Resistance, Wet Grip, and Abrasion Resistance

• Published in: Advances in polymer technology 2022-04, Vol.2022, p.1-16
• Main Authors: Hassanabadi, Majid, Najafi, Mohammad, Nikazar, Sohrab, Garakani, Sadaf Saeedi, Motlagh, Ghodratollah Hashemi
• Format: Article
• Language: English
• Subjects: Butadiene; Chemical properties; Polymerization; Rubber; Silicon compounds; Tire industry; Tires
• ISSN: 0730-6679; 1098-2329
• DOI: 10.1155/2022/1566042

Solution styrene-butadiene rubber (SBR) and silica filler have attracted a significant attention because of their superior properties in cured rubber mixtures used in automobile tire industry. One of the challenges ahead of using these materials is the hard dispersion of silica with its polar surface in SBR nonpolar rubber. In the present study, the synthesis of styrene-butadiene rubber by solution polymerization method with polymer chain modification using copolymer functionalization was performed. For this purpose, two materials, namely, aminopropyl triethoxy silane (APTES) and tetraethoxy silicate (TEOS), were employed to improve the silica dispersion in the mixture. The results of postsynthesis structural tests show the successful placement of functional groups on the polymer chain. The results of mechanical, dynamic, and imaging analyses of the cured mixtures showed an improvement in the APTES-containing samples rolling resistance, wet surface grip, and abrasion resistance by 39%, 18%, and 17%, respectively, due to having stronger physical and chemical bonds with silica and also the usage of end agents in the polymer chain. The samples containing TEOS had also better results than the conventional SBR rubber. In addition, a sample containing emulsion styrene-butadiene rubber was prepared to compare its properties with those of the solution SBR. Another SBR sample containing silane coupling agent was also prepared to investigate its performance compared to that of the agents placed on the polymer chain. The abrasion resistance, rolling resistance, and wet grip of the coupling agent containing sample showed 2%, 10%, and 30% improvement, respectively, which were very close to those of the sample containing the TEOS agent. In this work, various techniques including, rheometry, wear, rolling, hardness, bound rubber content, dynamic mechanical thermal analysis (DMTA), and field emission scanning electron microscopy (FE-SEM) were employed to analyze the synthesized rubber.