Evaluating laser surface melting of NiCrAlY-APS coating and its effect on high-temperature oxidation behavior of NiCrAlY/YSZ thermal barrier coating before and after surface melting

• Published in: Heliyon 2023-12, Vol.9 (12), p.e23094-e23094, Article e23094
• Main Authors: Gavahian Jahromi, Mohammad, Shoja Razavi, Reza, Valefi, Zia, Naderi-Samani, Hamed, Taghi-Ramezani, Saeid
• Format: Article
• Language: English
• Subjects: Columnar dendrites; Laser surface melting; NiCrAlY coating; Oxidation; Thermal barrier coating; Thickness
• ISSN: 2405-8440; 2405-8440
• DOI: 10.1016/j.heliyon.2023.e23094

This research study was conducted to investigate the laser melting parameters of NiCrAlY-APS coating. High-temperature oxidation was investigated using yttria partially stabilized zirconia (YSZ) ceramic coating. Also, the oxidation behavior of the TBC coating was investigated and studied before to and after laser surface melting of the NiCrAlY coating. Microstructural characterization was done using a scanning electron microscope (SEM), elemental analysis by energy dispersive spectroscopy (EDS), and phase analysis by X-ray diffraction (XRD). Surface melting was then performed in the power range of 150–300 W and scanning speed of 2–6 mm s−1. Surface melting was also conducted on the coating using two strategies: single-pass and multi-pass. The obtained results showed that the average melting depth and thickness reduction were directly related to the laser power, while they had an inverse relation with the laser scanning speed. Furthermore, multi-pass surface melting parameters reduced porosity to less than 0.1 %. Roughness measurements also showed a decrease in the coating's surface hardness after surface melting, as compared to the APS coating. The structure consisted of oriented columnar dendrites after melting the laser. The adhesion strength of the TBC coating and laser surface melting coating was at 41 MPa and 53 MPa, respectively. After 200 h of oxidation in the G1504 sample, the TGO layer's growth was decreased; due to the growth of a single oxide layer, it had better oxidation resistance in comparison to the other sample.