Exploring the Use of Cold Atmospheric Plasma for Sound and Vibration Generation

• Published in: Sensors (Basel, Switzerland) Switzerland), 2024-05, Vol.24 (11), p.3518
• Main Authors: Ghaderi, Nasser, Hasheminejad, Navid, Dirckx, Joris, Vanlanduit, Steve
• Format: Article
• Language: English
• Subjects: acoustic wave visualization; Acoustics; Analysis; Atmospheric pressure; Cold; cold atmospheric plasma; Experiments; Humidity; Lasers; Measurement techniques; mechanical excitation; Plasma; Polymethylmethacrylate; scanning Laser Doppler Vibrometer; Sensors; Signal processing; Sound waves; Ultrasonic imaging; ultrasound sensor; Visualization
• ISSN: 1424-8220; 1424-8220
• DOI: 10.3390/s24113518

In this study, we investigate the potential of cold atmospheric plasma (CAP) as a non-contact excitation device, comparing its performance with an ultrasound transmitter. Utilizing a scanning Laser Doppler Vibrometer (LDV), we visualize the acoustic wavefront generated by a CAP probe and an ultrasound sensor within a designated 50 mm × 50 mm area in front of each probe. Our focus lies in assessing the applicability of a CAP probe for exciting a small polymethyl methacrylate (PMMA) sample. By adjusting the dimensions of the sample to resonate at the excitation frequency of the probe, we can achieve high vibrational velocities, enabling further mechanical analysis. In contrast with traditional vibration excitation techniques such as electrodynamical shakers and hammer impact excitation, a plasma probe can offer distinct advantages without altering the structure's dynamics since it is contactless. Furthermore, in comparison with laser excitation, plasma excitation provides a higher power level. Additionally, while pressurized air systems are applicable for limited low frequencies, plasma probes can perform at higher frequencies. Our findings in this study suggest that CAP is comparable with acoustic excitation, indicating its potential as an effective mechanical excitation method.