Loading…
Injection moulding of long glass fibre reinforced polyamide 6-6: guidelines to improve flexural properties
Based on a previous optimisation of set-up parameters for injection moulding of polyamide 6-6 (PA 6-6) reinforced with 40-wt% of 10 mm long glass fibre, the aim of this paper is to define suitable guidelines to further improve the mechanical performances of PA 6-6/glass long fibre thermoplastic (LFT...
Saved in:
Published in: | Express polymer letters 2007-07, Vol.1 (7), p.456-466 |
---|---|
Main Authors: | , , , |
Format: | Article |
Language: | English |
Subjects: | |
Citations: | Items that cite this one |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
cited_by | cdi_FETCH-LOGICAL-c409t-df57f82d6627402a457e801ae69d285f718cf2213cf4d5d247586b557fdf716b3 |
---|---|
cites | |
container_end_page | 466 |
container_issue | 7 |
container_start_page | 456 |
container_title | Express polymer letters |
container_volume | 1 |
creator | Lafranche, E. Krawczak, P. Ciolczyk, J. P. Maugey, J. |
description | Based on a previous optimisation of set-up parameters for injection moulding of polyamide 6-6 (PA 6-6) reinforced with 40-wt% of 10 mm long glass fibre, the aim of this paper is to define suitable guidelines to further improve the mechanical performances of PA 6-6/glass long fibre thermoplastic (LFT) injection mouldings. Different solutions have been considered: screw and non-return valve design modification so as to adapt them to LFT processing, increase of the initial fibre content (up to 50 wt%) and length (up to 25 mm) in the LFT pellets. Using a LFT dedicated plasticating unit has allowed decreasing the fibre breakage amount by about 80% at the nozzle exit, however without improving the flexural properties. Increasing the initial fibre content has logically permitted to improve the flexural properties. Increasing the initial fibre length has not brought any improvement of the properties and has even amplified the structural heterogeneities and anisotropy of the parts. These trends have been explained on the basis of cavity pressure records highlighting significantly different rheological behaviours, and of resulting residual fibre lengths and through-the-thickness fibre orientation profiles modifications. |
doi_str_mv | 10.3144/expresspolymlett.2007.64 |
format | article |
fullrecord | <record><control><sourceid>hal_doaj_</sourceid><recordid>TN_cdi_doaj_primary_oai_doaj_org_article_28b9281d45dc4f0fb653666c07af716d</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><doaj_id>oai_doaj_org_article_28b9281d45dc4f0fb653666c07af716d</doaj_id><sourcerecordid>oai_HAL_hal_01767930v1</sourcerecordid><originalsourceid>FETCH-LOGICAL-c409t-df57f82d6627402a457e801ae69d285f718cf2213cf4d5d247586b557fdf716b3</originalsourceid><addsrcrecordid>eNpdkU1PxCAQhhujiUb9D1w9dAVKgfVmjB-bbOJFE2-EwrCyoaWBrtF_L3WNUecyw8y8D4S3qhDBi4YwdgnvY4Kcxxg--gDTtKAYiwVnB9UJEVLWnMiXw1_1cXWe8xaXaNqGY3pSbVfDFszk44D6uAvWDxsUHQqx5E3QOSPnuwQogR9cTAYsmm_TvbeAeM2v0GZXyuAHyGiKyPdjim-AXID3XdIBleMIafKQz6ojp0OG8-98Wj3f3T7dPNTrx_vVzfW6Ngwvp9q6VjhJLedUMEw1awVITDTwpaWydYJI4ygljXHMtpYy0UretUVky4x3zWm12nNt1Fs1Jt_r9KGi9uqrEdNG6fIgE0BR2S2pJJa11jCHXcfLt3BusNAzyxbWxZ71qsMf1MP1Ws09TAQXywa_kbIr97smxZwTuB8BwWq2S_23S812Kc6aT4gIjz0</addsrcrecordid><sourcetype>Open Website</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Injection moulding of long glass fibre reinforced polyamide 6-6: guidelines to improve flexural properties</title><source>Full-Text Journals in Chemistry (Open access)</source><creator>Lafranche, E. ; Krawczak, P. ; Ciolczyk, J. P. ; Maugey, J.</creator><creatorcontrib>Lafranche, E. ; Krawczak, P. ; Ciolczyk, J. P. ; Maugey, J.</creatorcontrib><description>Based on a previous optimisation of set-up parameters for injection moulding of polyamide 6-6 (PA 6-6) reinforced with 40-wt% of 10 mm long glass fibre, the aim of this paper is to define suitable guidelines to further improve the mechanical performances of PA 6-6/glass long fibre thermoplastic (LFT) injection mouldings. Different solutions have been considered: screw and non-return valve design modification so as to adapt them to LFT processing, increase of the initial fibre content (up to 50 wt%) and length (up to 25 mm) in the LFT pellets. Using a LFT dedicated plasticating unit has allowed decreasing the fibre breakage amount by about 80% at the nozzle exit, however without improving the flexural properties. Increasing the initial fibre content has logically permitted to improve the flexural properties. Increasing the initial fibre length has not brought any improvement of the properties and has even amplified the structural heterogeneities and anisotropy of the parts. These trends have been explained on the basis of cavity pressure records highlighting significantly different rheological behaviours, and of resulting residual fibre lengths and through-the-thickness fibre orientation profiles modifications.</description><identifier>ISSN: 1788-618X</identifier><identifier>EISSN: 1788-618X</identifier><identifier>DOI: 10.3144/expresspolymlett.2007.64</identifier><language>eng</language><publisher>BME-PT Hungary</publisher><subject>Chemical and Process Engineering ; Engineering Sciences ; Fibre length and content ; Injection moulding ; Long Fibre Thermoplastics ; Materials ; Mechanical properties ; Mechanics ; Mechanics of materials ; Polymer composites</subject><ispartof>Express polymer letters, 2007-07, Vol.1 (7), p.456-466</ispartof><rights>Distributed under a Creative Commons Attribution 4.0 International License</rights><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c409t-df57f82d6627402a457e801ae69d285f718cf2213cf4d5d247586b557fdf716b3</citedby><orcidid>0000-0003-0838-6174 ; 0000-0002-7813-3159</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>230,314,780,784,885,27915,27916</link.rule.ids><backlink>$$Uhttps://hal.science/hal-01767930$$DView record in HAL$$Hfree_for_read</backlink></links><search><creatorcontrib>Lafranche, E.</creatorcontrib><creatorcontrib>Krawczak, P.</creatorcontrib><creatorcontrib>Ciolczyk, J. P.</creatorcontrib><creatorcontrib>Maugey, J.</creatorcontrib><title>Injection moulding of long glass fibre reinforced polyamide 6-6: guidelines to improve flexural properties</title><title>Express polymer letters</title><description>Based on a previous optimisation of set-up parameters for injection moulding of polyamide 6-6 (PA 6-6) reinforced with 40-wt% of 10 mm long glass fibre, the aim of this paper is to define suitable guidelines to further improve the mechanical performances of PA 6-6/glass long fibre thermoplastic (LFT) injection mouldings. Different solutions have been considered: screw and non-return valve design modification so as to adapt them to LFT processing, increase of the initial fibre content (up to 50 wt%) and length (up to 25 mm) in the LFT pellets. Using a LFT dedicated plasticating unit has allowed decreasing the fibre breakage amount by about 80% at the nozzle exit, however without improving the flexural properties. Increasing the initial fibre content has logically permitted to improve the flexural properties. Increasing the initial fibre length has not brought any improvement of the properties and has even amplified the structural heterogeneities and anisotropy of the parts. These trends have been explained on the basis of cavity pressure records highlighting significantly different rheological behaviours, and of resulting residual fibre lengths and through-the-thickness fibre orientation profiles modifications.</description><subject>Chemical and Process Engineering</subject><subject>Engineering Sciences</subject><subject>Fibre length and content</subject><subject>Injection moulding</subject><subject>Long Fibre Thermoplastics</subject><subject>Materials</subject><subject>Mechanical properties</subject><subject>Mechanics</subject><subject>Mechanics of materials</subject><subject>Polymer composites</subject><issn>1788-618X</issn><issn>1788-618X</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2007</creationdate><recordtype>article</recordtype><sourceid>DOA</sourceid><recordid>eNpdkU1PxCAQhhujiUb9D1w9dAVKgfVmjB-bbOJFE2-EwrCyoaWBrtF_L3WNUecyw8y8D4S3qhDBi4YwdgnvY4Kcxxg--gDTtKAYiwVnB9UJEVLWnMiXw1_1cXWe8xaXaNqGY3pSbVfDFszk44D6uAvWDxsUHQqx5E3QOSPnuwQogR9cTAYsmm_TvbeAeM2v0GZXyuAHyGiKyPdjim-AXID3XdIBleMIafKQz6ojp0OG8-98Wj3f3T7dPNTrx_vVzfW6Ngwvp9q6VjhJLedUMEw1awVITDTwpaWydYJI4ygljXHMtpYy0UretUVky4x3zWm12nNt1Fs1Jt_r9KGi9uqrEdNG6fIgE0BR2S2pJJa11jCHXcfLt3BusNAzyxbWxZ71qsMf1MP1Ws09TAQXywa_kbIr97smxZwTuB8BwWq2S_23S812Kc6aT4gIjz0</recordid><startdate>20070701</startdate><enddate>20070701</enddate><creator>Lafranche, E.</creator><creator>Krawczak, P.</creator><creator>Ciolczyk, J. P.</creator><creator>Maugey, J.</creator><general>BME-PT Hungary</general><general>Budapest University of Technology</general><scope>AAYXX</scope><scope>CITATION</scope><scope>1XC</scope><scope>DOA</scope><orcidid>https://orcid.org/0000-0003-0838-6174</orcidid><orcidid>https://orcid.org/0000-0002-7813-3159</orcidid></search><sort><creationdate>20070701</creationdate><title>Injection moulding of long glass fibre reinforced polyamide 6-6: guidelines to improve flexural properties</title><author>Lafranche, E. ; Krawczak, P. ; Ciolczyk, J. P. ; Maugey, J.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c409t-df57f82d6627402a457e801ae69d285f718cf2213cf4d5d247586b557fdf716b3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2007</creationdate><topic>Chemical and Process Engineering</topic><topic>Engineering Sciences</topic><topic>Fibre length and content</topic><topic>Injection moulding</topic><topic>Long Fibre Thermoplastics</topic><topic>Materials</topic><topic>Mechanical properties</topic><topic>Mechanics</topic><topic>Mechanics of materials</topic><topic>Polymer composites</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Lafranche, E.</creatorcontrib><creatorcontrib>Krawczak, P.</creatorcontrib><creatorcontrib>Ciolczyk, J. P.</creatorcontrib><creatorcontrib>Maugey, J.</creatorcontrib><collection>CrossRef</collection><collection>Hyper Article en Ligne (HAL)</collection><collection>DOAJ Directory of Open Access Journals</collection><jtitle>Express polymer letters</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Lafranche, E.</au><au>Krawczak, P.</au><au>Ciolczyk, J. P.</au><au>Maugey, J.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Injection moulding of long glass fibre reinforced polyamide 6-6: guidelines to improve flexural properties</atitle><jtitle>Express polymer letters</jtitle><date>2007-07-01</date><risdate>2007</risdate><volume>1</volume><issue>7</issue><spage>456</spage><epage>466</epage><pages>456-466</pages><issn>1788-618X</issn><eissn>1788-618X</eissn><abstract>Based on a previous optimisation of set-up parameters for injection moulding of polyamide 6-6 (PA 6-6) reinforced with 40-wt% of 10 mm long glass fibre, the aim of this paper is to define suitable guidelines to further improve the mechanical performances of PA 6-6/glass long fibre thermoplastic (LFT) injection mouldings. Different solutions have been considered: screw and non-return valve design modification so as to adapt them to LFT processing, increase of the initial fibre content (up to 50 wt%) and length (up to 25 mm) in the LFT pellets. Using a LFT dedicated plasticating unit has allowed decreasing the fibre breakage amount by about 80% at the nozzle exit, however without improving the flexural properties. Increasing the initial fibre content has logically permitted to improve the flexural properties. Increasing the initial fibre length has not brought any improvement of the properties and has even amplified the structural heterogeneities and anisotropy of the parts. These trends have been explained on the basis of cavity pressure records highlighting significantly different rheological behaviours, and of resulting residual fibre lengths and through-the-thickness fibre orientation profiles modifications.</abstract><pub>BME-PT Hungary</pub><doi>10.3144/expresspolymlett.2007.64</doi><tpages>11</tpages><orcidid>https://orcid.org/0000-0003-0838-6174</orcidid><orcidid>https://orcid.org/0000-0002-7813-3159</orcidid><oa>free_for_read</oa></addata></record> |
fulltext | fulltext |
identifier | ISSN: 1788-618X |
ispartof | Express polymer letters, 2007-07, Vol.1 (7), p.456-466 |
issn | 1788-618X 1788-618X |
language | eng |
recordid | cdi_doaj_primary_oai_doaj_org_article_28b9281d45dc4f0fb653666c07af716d |
source | Full-Text Journals in Chemistry (Open access) |
subjects | Chemical and Process Engineering Engineering Sciences Fibre length and content Injection moulding Long Fibre Thermoplastics Materials Mechanical properties Mechanics Mechanics of materials Polymer composites |
title | Injection moulding of long glass fibre reinforced polyamide 6-6: guidelines to improve flexural properties |
url | http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-14T23%3A41%3A01IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-hal_doaj_&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Injection%20moulding%20of%20long%20glass%20fibre%20reinforced%20polyamide%206-6:%20guidelines%20to%20improve%20flexural%20properties&rft.jtitle=Express%20polymer%20letters&rft.au=Lafranche,%20E.&rft.date=2007-07-01&rft.volume=1&rft.issue=7&rft.spage=456&rft.epage=466&rft.pages=456-466&rft.issn=1788-618X&rft.eissn=1788-618X&rft_id=info:doi/10.3144/expresspolymlett.2007.64&rft_dat=%3Chal_doaj_%3Eoai_HAL_hal_01767930v1%3C/hal_doaj_%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-c409t-df57f82d6627402a457e801ae69d285f718cf2213cf4d5d247586b557fdf716b3%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true |