Microcapsule-Based Signal Amplification Method for Biomolecules

• Published in: Sensors (Basel, Switzerland) Switzerland), 2019-06, Vol.19 (12), p.2711
• Main Author: Yamaguchi, Masaki
• Format: Article
• Language: English
• Subjects: Adsorption; Arrays; Bioassays; Biomarkers; Biomolecules; biosensor; Biosensors; Communication; Dyes; Immunoassay; Lipids; Methods; micro-well array; microcapsule; Optical density; photo-responsive; Point of care testing; Sensors; signal simplification; Thickness; Titanium dioxide
• ISSN: 1424-8220; 1424-8220
• DOI: 10.3390/s19122711

The direct signal amplification of target molecules could be an effective means of increasing the sensitivity and reducing the size of biosensors. The purpose of this study was to propose a novel signal amplification method suitable for the detection of biomolecules using microcapsules that can quickly respond to concentration variation. This microcapsule-based amplification method consists of two elements-microcapsules and a well-array. The microcapsules consist of (i) an inner shell fabricated through layer-by-layer assembly, (ii) a lipid bilayer, and (iii) loaded target molecules. In this method, the inner surface of the well-array was modified using TiO as a photocatalyst. The diameter and thickness of the fabricated micro-capsules for biomarker loading were shown to be 2.7 μm and 78 nm, respectively. An ultraviolet (UV) irradiation time of 5 min was needed when the change in optical density reached 90% saturation of the optical density change. Dye molecules were incorporated into the microcapsules and were subsequently released, and the concentration of the released solution changed in proportion with the encapsulated dye concentration. This demonstrates the proof of concept for this novel signal amplification method based on microcapsules.