Hybrid Z-Source Circuit Breaker with Thomson Coil for MVDC

• Published in: Energies (Basel) 2024-01, Vol.17 (1), p.69
• Main Authors: Lee, Hyun-Seung, Kang, Hyung-Wook, Rhee, Jae-Ho, Lee, Kun-A
• Format: Article
• Language: English
• Subjects: Efficiency; Energy; hybrid circuit breaker; Magnetic fields; Power supply; Stress (Psychology); Thomson coil actuator; Z-source circuit breaker
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en17010069

Hybrid circuit breakers are the most promising circuit breakers among DC circuit breakers. Conventional hybrid circuit breakers complete fault current isolation by converting current to IGBT when fault current occurs. However, in this case, the fault current continues to increase, so the IGBT must be large enough to withstand this current. In addition, in the case of a method of detecting and operating a fault, a delay time of up to hundreds of microseconds occurs, and in a hybrid circuit breaker, this delay time is a very large value. To solve this problem, this paper proposes a hybrid Z-source circuit breaker that operates without delay for low-impedance faults. The proposed breaker is designed to reduce stress on IGBTs and mechanical switches by generating a current zero crossing, as well as to enable the breaker to trip quickly in high-risk cases such as low-impedance fault circuits. Due to the limited environment of the laboratory, we performed 600 V fault isolation experiments. As a result of the experiment, it was confirmed that the proposed circuit breaker successfully isolated the fault within 1.6 ms. The current limiting feature of the Z-source appears to reduce stress on the IGBTs and MOVs used, and it allows for faster fault isolation.