Palm Oil Mill Effluent (POME) utilization for bio-hydrogen production targeting for biofuel : optimization and scale up

• Published in: E3S web of conferences 2018-01, Vol.67, p.2003
• Main Authors: Prasetyo, Joni, Sumbogo Murti, S.D., Senda, Semuel Pati, Latief, Andi Djalal, Dwi Husodo Prasetyo, R., Hastuti, Zulaicha Dwi, Yanti, Fusia Mirda, Juanda, Firdaus, Permana, Edwin, Muis, Lince
• Format: Article
• Language: English
• ISSN: 2267-1242; 2267-1242
• DOI: 10.1051/e3sconf/20186702003

Indonesia is the largest palm plantation that reaches 32 million tonnes palm oil production per year with 84 million tones Palm Oil Mill Effluent (POME) as liquid waste. POME contains many organic substances. The quality of POME for its utilization is generally measured in COD which has range 30000 -100.000 ppm. Microbial convertion for biogas especially for bio-H 2 enrichment, the active sludge was pretreated physically to suppress methanogenesis microbes. H 2 Biogas production was conducted at pH 5-6. Additional 10% phosphate buffer was done in the beginning only. The production of H 2 biogas was influenced by hydrostatic pressure in closed batch system. Inoculumsmedium ratio also influenced the H 2 biogas productivity, reached 0.7 ml/ml POME with more than 50% H 2 . Scaling up anaerobic in 2.5 L working volume bioreactor, H 2 biogas productivity reached 0.86 ml/ml POME by 10% inoculums because of no hydrostatic pressure. In bio-reactor, H 2 -CO 2 in H 2 biogas was affected by the amount of active sludge. In the beginning of H 2 biogas, H 2 reached 80%. However, at subsequence process, fed batch, with retention time 2.5 day and 3 days H 2 biogas production, the active sludge was accumulated and caused the decreasing H 2 , finally only 46% at the 3 rd day. The consortium tended to produce more CO 2 as the result of primary metabolite rather than H 2 . Raising inoculums to level 15% improved productivity only in the beginning but H 2 content was getting less, only 59%. Additional feeding would cause more accumulation sludge and more decreasing H 2 content to 31% on the 3 rd day. Thus, the ratio of active sludge and substrate availability must be controlled to gain optimum H 2 . Limited substrate will cause the direction of bio-conversion more in CO 2 rather than H 2 .