Influence of Copper Foam on the Thermal Characteristics of Phase Change Materials

• Published in: Energies (Basel) 2023-02, Vol.16 (4), p.1994
• Main Authors: You, Xiaokuan, Sun, Xiangxin, Huang, Jie, Wang, Zilong, Zhang, Hua
• Format: Article
• Language: English
• Subjects: Accuracy; Composite materials; Composition; Conductivity; Copper; copper foam; Energy storage; enhanced heat transfer; Error analysis; Heat conductivity; Heat storage; Heat transfer; metal foam partially filled; Metal foams; Methods; Paraffins; Phase change materials; Rayleigh numbers; Simulation; Solar heating; Solids; Storage systems; Temperature; Thermal conductivity; Thermal energy; Thermal properties; Thermal storage
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en16041994

The phase change material is a hot research topic in solar thermal storage systems. However, the thermal conductivity of pure phase change materials is usually low, which hinders its application in facilities. In this study, copper foam is used to increase the thermal characteristics of the paraffin. Simulations are conducted to compare the melting characteristics of the pure paraffin and the paraffin/copper foam composite phase change material. A visualized experimental device was designed and built, and the copper foam composite phase change material, with a volume fraction of 15%, was prepared by filling part of the copper foam in the phase change material. The simulation results agree well with the experimental results. The root mean square errors of the temperature for the pure paraffin and the composite phase change material are 0.0223 and 0.0179, respectively. The experimental results show that the copper foam can enhance thermal conductivity and decrease melting time. It takes 870 s for the composite phase change material to melt, which is 3.44% less than that of the pure paraffin. This study deepens the understanding of the composite phase change material and provides a reference for the design of thermal energy storage devices.