Increasing Turbine Hall Safety by Using Fire-Resistant, Hydrogen-Containing Lubricant Cooling Liquid for Rotor Steel Mechanical Treatment

• Published in: Energies (Basel) 2023-01, Vol.16 (1), p.535
• Main Authors: Balitskii, Alexander, Havrilyuk, Maria, Balitska, Valentina, Kolesnikov, Valeriі, Ivaskevych, Ljubomyr
• Format: Article
• Language: English
• Subjects: Alcohol; Chip formation; Chips; Composition; Coolants; Cooling; Corrosion; Corrosion resistance; Cutting tools; Design and construction; Destruction; Drilling; environment-friendly, green lubricating and cooling liquids; Environmental impact; Fire resistance; High strength steels; Hygiene; Intermetallic compounds; Lubricants; Lubricants & lubrication; Lubrication and lubricants; Machining; mechanical treatment; Methods; Petroleum engineering; Potash; Potassium; Production increases; rapeseed; Raw materials; Stability analysis; Steel; Structural steels; sunflower oils; Surface treatment; Triglycerides; Turbines; Turning (machining); Vegetable oils
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en16010535

This paper is devoted to the development of hydrogen-containing, environmentally safe, fire-resistant, and corrosion-protected lubricant cooling liquids (LCLs) from vegetable oils with improved sanitary and hygienic parameters for the machining of parts and equipment made from high-strength steels for application during the interoperation period in turbine halls. The use of plant raw materials as ecologically and fire-safe LCLs increased the efficiency of LCLs when evaluating drilling steel in terms of the dependence of the stability of the cutting tool on the drilling speed. Chips formed from LCLs during turning had a compact, cylindrical appearance, and the addition of both water and coolant during turning significantly changed the morphology of the cutting particles. Using water and LCL intensified the physical and chemical destruction processes. After the use of water and LCL, the concentration of hydrogen in the cutting products of 38KHN3MFA steel increased, which indicated its participation in facilitating the destruction during machining. In the chips formed when using LCL, the amount of hydrogen increased by 2.25 times compared to the chips obtained with the dry treatment, while with coolants, it increased by 2.6 times, indicating the intense flow of decomposition products of LCL through diffusion processes in the cutting zone. Hydrogen reduces the energy costs for the destruction of structural and phase components and promotes their dispersion. The creation of 2D and 3D images allowed for a more detailed approach to the study of the influence of LCL on surface treatments.