Optimization of operating conditions of an internal combustion engine used as chemical reactor for methane reforming using ozone as an additive

• Published in: Applications in energy and combustion science 2023-03, Vol.13, p.100109, Article 100109
• Main Authors: Mishra, Pallabi, Gossler, Hendrik, Deutschmann, Olaf
• Format: Article
• Language: English
• Subjects: Dry reforming of methane; Hydrocarbon production; Internal combustion engine; Numerical optimization; Ozone as reaction booster
• ISSN: 2666-352X; 2666-352X
• DOI: 10.1016/j.jaecs.2022.100109

Internal combustion engines can be used as chemical reactors exploiting the high temperature and pressure as well as short residence time for chemical conversion. For instance, methane and CO2 can be efficiently converted to H2 and CO (syngas). The process can be boosted by additives such as dimethyl ether (DME). In this paper, the focus is on optimizing the operating conditions for the use of ozone, O3, as an alternative fuel additive for dry reforming of methane. Furthermore, methane can be converted to C2 hydrocarbons, which is also studied numerically to find optimized operating conditions, again using O3 as an additive. The engine is modelled as a single-zone batch reactor under ideal gas assumptions with a variable volume profile. An elementary-step reaction mechanism consisting of 749 reactions among 132 species and including O3 chemistry was used for the simulations. CO2 conversion of over 70% is possible using O3 as an additive, whereas the maximum achievable using DME was around 50%. The optimized yield of C2H4 is higher with O3 as an additive as compared to DME, at all the inlet gas temperatures, whereas it is lower for CH2O and comparable for C6H6 and CH3OH. •Use of internal combustion engine as reactor for reforming methane with CO2.•Effect of ozone as fuel additive on reforming studied.•Numerical optimization of operating conditions for maximizing CO2 conversion.•Model predicts over 70% of CO2 conversion at optimized conditions.•Numerical optimization of operating conditions for maximizing production of C2 hydrocarbons.•Optimized yield of C2H4 is higher with ozone as an additive as compared to DME.