Blind Recognition of Forward Error Correction Codes Based on Recurrent Neural Network

• Published in: Sensors (Basel, Switzerland) Switzerland), 2021-06, Vol.21 (11), p.3884
• Main Authors: Mei, Fan, Chen, Hong, Lei, Yingke
• Format: Article
• Language: English
• Subjects: Accuracy; Algorithms; blind recognition; Block codes; Codes; Coding; Cognitive radio; Communications systems; Convolutional codes; Deep learning; Discriminant analysis; Efficiency; Error correcting codes; Error correction; Error correction & detection; forward error correction codes; Identification methods; Neural networks; non-cooperative system; Parameter estimation; Parameter identification; parameter initialization; Recognition; recurrent neural network; Recurrent neural networks; Signal processing; Signal to noise ratio; Turbo codes
• ISSN: 1424-8220; 1424-8220
• DOI: 10.3390/s21113884

Forward error correction coding is the most common way of channel coding and the key point of error correction coding. Therefore, the recognition of which coding type is an important issue in non-cooperative communication. At present, the recognition of FEC codes is mainly concentrated in the field of semi-blind identification with known types of codes. However, the receiver cannot know the types of channel coding previously in non-cooperative systems such as cognitive radio and remote sensing of communication. Therefore, it is important to recognize the error-correcting encoding type with no prior information. In the paper, we come up with a neoteric method to identify the types of FEC codes based on Recurrent Neural Network (RNN) under the condition of non-cooperative communication. The algorithm classifies the input data into Bose-Chaudhuri-Hocquenghem (BCH) codes, Low-density Parity-check (LDPC) codes, Turbo codes and convolutional codes. So as to train the RNN model with better performance, the weight initialization method is optimized and the network performance is improved. The experimental result indicates that the average recognition rate of this model is 99% when the signal-to-noise ratio (SNR) ranges from 0 dB to 10 dB, which is in line with the requirements of engineering practice under the condition of non-cooperative communication. Moreover, the comparison of different parameters and models show the effectiveness and practicability of the algorithm proposed.