Comparison of Sea Surface Variation Derived from Global Navigation Satellite System (GNSS) and Co-tidal in Java Sea

• Published in: E3S Web of Conferences 2019-01, Vol.94, p.1007
• Main Authors: Guruh Pratomo, Danar, Khomsin, Syaputra, Khariz
• Format: Article
• Language: English
• Subjects: Global navigation satellite system; Navigation; Polls & surveys; Root-mean-square errors; Simulation; Variation; Zoning
• ISSN: 2267-1242; 2555-0403; 2267-1242
• DOI: 10.1051/e3sconf/20199401007

Tide represents the vertical variation of sea surface. This parameter plays important rules in bathymetric survey. The conventional method to observe the sea surface variation is by using tide pole. Nowdays, a Global Navigation Satellite System (GNSS) can be used as a means to measure the variation of sea surface as it provides high accuracy coordinates. In this research, the vertical component of GNSS was utilized to analyze the variation of sea surface. The distance between tidal stations and the survey area can be a constrain to the depth reduction because its tidal zoning. The traditional tidal zoning is a discrete model. This can be minimalized using a co-tidal chart. In this research, the vertical variation of sea surface from GNSS and co-tidal chart approachs were examined and compared to the conventional method. The comparative analysis was performed with Root Mean Square Error (RMSE). The maximum and minimum RMSE during 3 days period between the GNSS and conventional approach are 0.246 m and 0.051 m, respectively. Whereas, the maximum and minimum RMSE between the co-tidal chart model and the conventional approach at the same time are 0.286 m and 0.109 m.