Tribological Performance of MoS2 Coatings in Various Environments

• Published in: Lubricants 2016-09, Vol.4 (3), p.32
• Main Authors: Gradt, Thomas, Schneider, Thomas
• Format: Article
• Language: English
• Subjects: cryogenic environment; extreme environments; hydrogen; MoS2; solid lubrication
• ISSN: 2075-4442; 2075-4442
• DOI: 10.3390/lubricants4030032

Molybdenum disulfide (MoS2) is a well-known solid lubricant for tribosystems running in vacuum or dry gases. Problems arise due to its sensitivity to humidity, which is a drawback for its application under ambient conditions. However, by using a physical vapor deposition (PVD) process, deposition parameters can be optimized not only to gain a coatings structure with favorable frictional properties but also to minimize the sensitivity to attack by water molecules. Therefore, an improved tribological behavior even under moist conditions can be achieved. MoS2 coatings are also candidates for being applied at cryogenic temperatures. They already have proven their suitability, e.g., for sliding support elements between superconducting magnets of the nuclear fusion-experiment Wendelstein 7-X. However, these coatings were exclusively produced for this particular application and the utilization for more common tribosystems may be precluded due to cost considerations. In view of a wider range of applications, pure and Cr containing PVD-MoS2 coatings with an optimized structure were tested under varying environments including hydrogen gas and cryogenic temperatures. Results of the most promising variant are presented in this paper.