Thermal Performance Investigation of Slotted Fin Minichannel Heat Sink for Microprocessor Cooling

• Published in: Energies (Basel) 2021-10, Vol.14 (19), p.6347
• Main Authors: Baig, Taha, Rehman, Zabdur, Tariq, Hussain Ahmed, Manzoor, Shehryar, Ali, Majid, Wadood, Abdul, Rajski, Krzysztof, Park, Herie
• Format: Article
• Language: English
• Subjects: base temperature; Cooling; Durability; Fluctuations; Heat flux; Heat generation; Heat sinks; Heat transfer; Investigations; Microprocessors; Numerical analysis; numerical simulation; Reynolds number; slotted fin minichannel heat sink; Temperature distribution; Thermal energy; thermal management; Thermal resistance
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en14196347

Due to high heat flux generation inside microprocessors, water-cooled heat sinks have gained special attention. For the durability of the microprocessor, this generated flux should be effectively removed. The effective thermal management of high-processing devices is now becoming popular due to high heat flux generation. Heat removal plays a significant role in the longer operation and better performance of heat sinks. In this work, to tackle the heat generation issues, a slotted fin minichannel heat sink (SFMCHS) was investigated by modifying a conventional straight integral fin minichannel heat sink (SIFMCHS). SFMCHSs with fin spacings of 0.5 mm, 1 mm, and 1.5 mm were numerically studied. The numerical results were then compared with SIFMCHSs present in the literature. The base temperatures recorded for two slots per fin minichannel heat sink (SPFMCHS), with 0.5 mm, 1 mm, and 1.5 mm fin spacings, were 42.81 °C, 46.36 °C, and 48.86 °C, respectively, at 1 LPM. The reductions in base temperature achieved with two SPFMCHSs were 9.20%, 8.74%, and 7.39% for 0.5 mm, 1 mm, and 1.5 mm fin spacings, respectively, as compared to SIFMCHSs reported in the literature. The reductions in base temperature noted for three SPFMCHSs were 8.53%, 9.05%, and 5.95% for 0.5 mm, 1 mm, and 1.5 mm fin spacings, respectively, at 1 LPM, as compared to SIFMCHSs reported in the literature. In terms of heat transfer performance, the base temperature and thermal resistance of the 0.5 mm-spaced SPFMCHS is better compared to 1 mm and 1.5 mm fin spacings. The uniform temperature distribution at the base of the heat sink was observed in all cases solved in current work.