The Effect of Projectile Nose Shape on the Critical Velocity of High-Performance Yarn

• Published in: Fibers 2019-04, Vol.7 (4), p.29
• Main Authors: Lim, Boon, Chu, Jou-Mei, Gao, Jinling, Claus, Benjamin, Nie, Yizhou, Chen, Wayne
• Format: Article
• Language: English
• Subjects: Axial loads; ballistic experiments; Contact angle; Critical velocity; Deformation; Euler-Bernoulli beams; Experiments; Failure analysis; Failure surface; Fibrillation; High speed cameras; high-performance fiber; Load cells; Load history; Mechanical properties; projectile nose shape; Projectiles; Radius of curvature; Shape effects; Smith theory; Stress concentration; Velocity; Yarn
• ISSN: 2079-6439; 2079-6439
• DOI: 10.3390/fib7040029

In this study, ballistic experiments were performed to determine the critical velocity of a Twaron® 2040 high-performance yarn transversely impacted by round projectiles. Four different round projectiles possessing a radius of curvature of 2 µm, 20 µm, 200 µm and 2 mm were used in this study. Load cells were mounted to the grips to measure the load history of the yarn upon impact. A high-speed camera was incorporated into the ballistic experimental setup to capture the failure process of the yarn upon impact. A scanning electron microscope was utilized to perform post-mortem failure analysis on the recovered specimens. The results showed that as the radius of curvature of the projectile increased, the critical velocity also increased. The critical velocities for all cases were bounded between those predicted from the Euler–Bernoulli beam and Smith models. Upon impact above the upper limit of the critical velocity, the axial loads revealed a demonstrative reduction. The failure surfaces changed from shear to fibrillation as the radius of curvature increased. For those specimens that failed in shear, Hertzian contact model was used to predict the critical velocity.