Experimental Study on Heat Storage/Release Performances of Composite Phase Change Thermal Storage Heating Wallboards Based on Photovoltaic Electric-Thermal Systems

• Published in: Energies (Basel) 2023-03, Vol.16 (6), p.2595
• Main Authors: Mi, Xue, Chen, Chao, Fu, Haoqi, Li, Gongcheng, Jiao, Yongxiang, Han, Fengtao
• Format: Article
• Language: English
• Subjects: Air conditioning; Alternative energy sources; Buildings; Calorific value; Carbon fibers; comparative experiment; Composite materials; composite phase change thermal storage heating wallboard; Drywall; Efficiency; Electricity; electrothermal film; Energy consumption; Graphene; Greenhouses; Heat; Heat storage; heat storage/release performance; Heat transfer; Hydronic heating; Insulation; Latent heat; Low voltage; Phase change materials; Photovoltaic cells; photovoltaic electro-thermal system; Photovoltaics; Product development; Solar energy; Solar energy industry; Technology; Thermal energy; Thermal storage; Voltage
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en16062595

The rapid development of photovoltaic technology provides more possibilities for the efficient application of solar energy in buildings. This research proposed a phase change material (PCM) heat storage wall system with a “four-layer” structure. A performance test platform using low voltage DC was built to study the mechanism of electric thermal conversion of the graphene electrothermal film and the heat transfer characteristics of the “four-layer” structure. As shown in the experimental results, under the voltages of 24 V, 32 V and 42 V, (1) with the increase in voltage, the temperature of the electrothermal film increases, while its electrothermal conversion efficiency decreases from 85% to 75%; (2) during the heat storage process, because of its latent heat storage characteristics, the temperature of the PCM wallboard is 3~5 °C lower than that of the cement wallboard, but the effective heat storage increases by 59~65%; (3) during the heat release process, the effective heat release of the PCM wallboard increases by 41–78%, and the maximum heat storage and release efficiency is 98%; and (4) at 32 V, the PCM can completely change phase. The theoretical calorific value of the electrothermal film is equivalent to the hourly power generation of 1.45 m2 of photovoltaic modules. The results provide basic data for the integration of photovoltaic and phase change technology and their efficient application in buildings.