Utilization of spruce (Picea abies [L.] Karst.) and beech (Fagus sylvatica L.) wood in plywood production using different processing pressures

In this research the spruce plywood board and combined spruce-beech plywood board were prepared in laboratory conditions using two levels of processing pressure. The bending properties in perpendicular and longitudinal direction were measured and compressibility and density were specified. Consideri...

Full description

Saved in:
Bibliographic Details
Published in:Journal of forest science (Praha) 2014-12, Vol.60 (12), p.495-499
Main Authors: Král, P., Klímek, P.
Format: Article
Language:English
Subjects:
composite
compression
density profile
veneer
Citations: Items that this one cites
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
cited_by
cites cdi_FETCH-LOGICAL-c211s-d2fb130e47c36533bc16c68e2bc36c309cfe06fdc16e216ceb48b18246f0427f3
container_end_page 499
container_issue 12
container_start_page 495
container_title Journal of forest science (Praha)
container_volume 60
creator Král, P.
Klímek, P.
description In this research the spruce plywood board and combined spruce-beech plywood board were prepared in laboratory conditions using two levels of processing pressure. The bending properties in perpendicular and longitudinal direction were measured and compressibility and density were specified. Considering the obtained results, there was found an overall increase of the bending properties in spruce plywood manufactured by the higher pressure and a decline of properties perpendicular to the grain in combined spruce-beech plywood board. On the other hand, combined spruce-beech plywood boards produced by the common processing pressure performed better than both types of spruce plywood.
doi_str_mv 10.17221/54/2014-JFS
format article
fullrecord <record><control><sourceid>doaj_cross</sourceid><recordid>TN_cdi_doaj_primary_oai_doaj_org_article_6a7092f10a684dd69e326b2a609c88df</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><doaj_id>oai_doaj_org_article_6a7092f10a684dd69e326b2a609c88df</doaj_id><sourcerecordid>oai_doaj_org_article_6a7092f10a684dd69e326b2a609c88df</sourcerecordid><originalsourceid>FETCH-LOGICAL-c211s-d2fb130e47c36533bc16c68e2bc36c309cfe06fdc16e216ceb48b18246f0427f3</originalsourceid><addsrcrecordid>eNo9kV1LHDEYhYdSwUX3zh-Qyy101nxNZuayLF2rLiioIIiEfLzZpkwnQ7JjWX-Ev9nsWLzJe3IOecLLKYozgpekppScV_ycYsLLq_Xdl2JGGlyVLasev2ZNCS15w_hxMU_Ja0xFWxNM8Kx4e9j5zr-qnQ89Cg6lIY4G0OLWG1BIaQ8JPW2Wz-haxbRbfkOqt0gDmN9osVbbMaG0717yc6PQJsf_QrDI92jo9pMcYrCjmehj8v0WWe8cROh3h8hAmswhZjHm47Q4cqpLMP8_T4qH9c_71a9yc3NxufqxKQ0lJJWWOk0YBl4bJirGtCHCiAaoznfDcGscYOFstoHmCDRvNGkoFw5zWjt2Ulx-cG1Qf-QQ_V8V9zIoLycjxK1UMS_VgRSqxi11BCvRcGtFC4wKTZXIvzSNPbC-f7BMDClFcJ88guVUjay4PFQjczXsHZrpglQ</addsrcrecordid><sourcetype>Open Website</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Utilization of spruce (Picea abies [L.] Karst.) and beech (Fagus sylvatica L.) wood in plywood production using different processing pressures</title><source>Freely Accessible Journals</source><creator>Král, P. ; Klímek, P.</creator><creatorcontrib>Král, P. ; Klímek, P.</creatorcontrib><description>In this research the spruce plywood board and combined spruce-beech plywood board were prepared in laboratory conditions using two levels of processing pressure. The bending properties in perpendicular and longitudinal direction were measured and compressibility and density were specified. Considering the obtained results, there was found an overall increase of the bending properties in spruce plywood manufactured by the higher pressure and a decline of properties perpendicular to the grain in combined spruce-beech plywood board. On the other hand, combined spruce-beech plywood boards produced by the common processing pressure performed better than both types of spruce plywood.</description><identifier>ISSN: 1212-4834</identifier><identifier>EISSN: 1805-935X</identifier><identifier>DOI: 10.17221/54/2014-JFS</identifier><language>eng</language><publisher>Czech Academy of Agricultural Sciences</publisher><subject>composite ; compression ; density profile ; veneer</subject><ispartof>Journal of forest science (Praha), 2014-12, Vol.60 (12), p.495-499</ispartof><lds50>peer_reviewed</lds50><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed><cites>FETCH-LOGICAL-c211s-d2fb130e47c36533bc16c68e2bc36c309cfe06fdc16e216ceb48b18246f0427f3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,776,780,27901,27902</link.rule.ids></links><search><creatorcontrib>Král, P.</creatorcontrib><creatorcontrib>Klímek, P.</creatorcontrib><title>Utilization of spruce (Picea abies [L.] Karst.) and beech (Fagus sylvatica L.) wood in plywood production using different processing pressures</title><title>Journal of forest science (Praha)</title><description>In this research the spruce plywood board and combined spruce-beech plywood board were prepared in laboratory conditions using two levels of processing pressure. The bending properties in perpendicular and longitudinal direction were measured and compressibility and density were specified. Considering the obtained results, there was found an overall increase of the bending properties in spruce plywood manufactured by the higher pressure and a decline of properties perpendicular to the grain in combined spruce-beech plywood board. On the other hand, combined spruce-beech plywood boards produced by the common processing pressure performed better than both types of spruce plywood.</description><subject>composite</subject><subject>compression</subject><subject>density profile</subject><subject>veneer</subject><issn>1212-4834</issn><issn>1805-935X</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2014</creationdate><recordtype>article</recordtype><sourceid>DOA</sourceid><recordid>eNo9kV1LHDEYhYdSwUX3zh-Qyy101nxNZuayLF2rLiioIIiEfLzZpkwnQ7JjWX-Ev9nsWLzJe3IOecLLKYozgpekppScV_ycYsLLq_Xdl2JGGlyVLasev2ZNCS15w_hxMU_Ja0xFWxNM8Kx4e9j5zr-qnQ89Cg6lIY4G0OLWG1BIaQ8JPW2Wz-haxbRbfkOqt0gDmN9osVbbMaG0717yc6PQJsf_QrDI92jo9pMcYrCjmehj8v0WWe8cROh3h8hAmswhZjHm47Q4cqpLMP8_T4qH9c_71a9yc3NxufqxKQ0lJJWWOk0YBl4bJirGtCHCiAaoznfDcGscYOFstoHmCDRvNGkoFw5zWjt2Ulx-cG1Qf-QQ_V8V9zIoLycjxK1UMS_VgRSqxi11BCvRcGtFC4wKTZXIvzSNPbC-f7BMDClFcJ88guVUjay4PFQjczXsHZrpglQ</recordid><startdate>20141231</startdate><enddate>20141231</enddate><creator>Král, P.</creator><creator>Klímek, P.</creator><general>Czech Academy of Agricultural Sciences</general><scope>AAYXX</scope><scope>CITATION</scope><scope>DOA</scope></search><sort><creationdate>20141231</creationdate><title>Utilization of spruce (Picea abies [L.] Karst.) and beech (Fagus sylvatica L.) wood in plywood production using different processing pressures</title><author>Král, P. ; Klímek, P.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c211s-d2fb130e47c36533bc16c68e2bc36c309cfe06fdc16e216ceb48b18246f0427f3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2014</creationdate><topic>composite</topic><topic>compression</topic><topic>density profile</topic><topic>veneer</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Král, P.</creatorcontrib><creatorcontrib>Klímek, P.</creatorcontrib><collection>CrossRef</collection><collection>Directory of Open Access Journals</collection><jtitle>Journal of forest science (Praha)</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Král, P.</au><au>Klímek, P.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Utilization of spruce (Picea abies [L.] Karst.) and beech (Fagus sylvatica L.) wood in plywood production using different processing pressures</atitle><jtitle>Journal of forest science (Praha)</jtitle><date>2014-12-31</date><risdate>2014</risdate><volume>60</volume><issue>12</issue><spage>495</spage><epage>499</epage><pages>495-499</pages><issn>1212-4834</issn><eissn>1805-935X</eissn><abstract>In this research the spruce plywood board and combined spruce-beech plywood board were prepared in laboratory conditions using two levels of processing pressure. The bending properties in perpendicular and longitudinal direction were measured and compressibility and density were specified. Considering the obtained results, there was found an overall increase of the bending properties in spruce plywood manufactured by the higher pressure and a decline of properties perpendicular to the grain in combined spruce-beech plywood board. On the other hand, combined spruce-beech plywood boards produced by the common processing pressure performed better than both types of spruce plywood.</abstract><pub>Czech Academy of Agricultural Sciences</pub><doi>10.17221/54/2014-JFS</doi><tpages>5</tpages><oa>free_for_read</oa></addata></record>
fulltext fulltext
identifier ISSN: 1212-4834
ispartof Journal of forest science (Praha), 2014-12, Vol.60 (12), p.495-499
issn 1212-4834
1805-935X
language eng
recordid cdi_doaj_primary_oai_doaj_org_article_6a7092f10a684dd69e326b2a609c88df
source Freely Accessible Journals
subjects composite
compression
density profile
veneer
title Utilization of spruce (Picea abies [L.] Karst.) and beech (Fagus sylvatica L.) wood in plywood production using different processing pressures
url http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-28T09%3A22%3A19IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-doaj_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Utilization%20of%20spruce%20(Picea%20abies%20%5BL.%5D%20Karst.)%20and%20beech%20(Fagus%20sylvatica%20L.)%20wood%20in%20plywood%20production%20using%20different%20processing%20pressures&rft.jtitle=Journal%20of%20forest%20science%20(Praha)&rft.au=Kr%C3%A1l,%20P.&rft.date=2014-12-31&rft.volume=60&rft.issue=12&rft.spage=495&rft.epage=499&rft.pages=495-499&rft.issn=1212-4834&rft.eissn=1805-935X&rft_id=info:doi/10.17221/54/2014-JFS&rft_dat=%3Cdoaj_cross%3Eoai_doaj_org_article_6a7092f10a684dd69e326b2a609c88df%3C/doaj_cross%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-c211s-d2fb130e47c36533bc16c68e2bc36c309cfe06fdc16e216ceb48b18246f0427f3%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true