Enhancement of wear and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing

• Published in: Defence technology 2015-03, Vol.11 (1), p.10-17
• Main Authors: Sudhakar, I., Madhu, V., Madhusudhan Reddy, G., Srinivasa Rao, K.
• Format: Article
• Language: English
• Subjects: Armour grade aluminium alloy; Ballistic resistance; Boron carbide; Friction stir processing; Molybdenum disulphide; Wear
• ISSN: 2214-9147; 2214-9147
• DOI: 10.1016/j.dt.2014.08.003

Industrial applications of aluminium and its alloys are restricted because of their poor tribological properties. Thermal spraying, laser surfacing, electron beam welding are the most widely used techniques to alter the surface morphology of base metal. Preliminary studies reveal that the coating and layering of aluminium alloys with ceramic particles enhance the ballistic resistance. Furthermore, among aluminium alloys, 7075 aluminium alloy exhibits high strength which can be compared to that of steels and has profound applications in the designing of lightweight fortification structures and integrated protection systems. Having limitations such as poor bond integrity, formation of detrimental phases and interfacial reaction between reinforcement and substrate using fusion route to deposit hard particles paves the way to adopt friction stir processing for fabricating surface composites using different sizes of boron carbide particles as reinforcement on armour grade 7075 aluminium alloy as matrix in the present investigation. Wear and ballistic tests were carried out to assess the performance of friction stir processed AA7075 alloy. Significant improvement in wear resistance of friction stir processed surface composites is attributed to the change in wear mechanism from abrasion to adhesion. It has also been observed that the surface metal matrix composites have shown better ballistic resistance compared to the substrate AA7075 alloy. Addition of solid lubricant MoS2 has reduced the depth of penetration of the projectile to half that of base metal AA7075 alloy. For the first time, the friction stir processing technique was successfully used to improve the wear and ballistic resistances of armour grade high strength AA7075 alloy.