Effect of Ce addition on the nucleation and growth of austenite in ultra-high-strength steel

• Published in: Journal of materials research and technology 2024-07, Vol.31, p.1744-1753
• Main Authors: Jiang, Yueyue, Xu, Yingchun, Dai, Qingwei, Yu, Daliang, Chai, Sensen, Chen, Yongli, Li, Yongchao
• Format: Article
• Language: English
• Subjects: Grain refinement; Heterogeneous nucleation; Inclusions; Rare earth; Ultra-high-strength steel
• ISSN: 2238-7854
• DOI: 10.1016/j.jmrt.2024.06.179

The effect of varying rare earth element cerium (Ce) contents (0∼0.0792 wt%) on the austenite grain size of ultra-high-strength engineering steel has been studied under different austenitization conditions (holding time of 5∼360 min at temperatures ranging from 900 °C to 1200 °C). Results show that the addition of Ce can refine grains, and the refining effect becomes more pronounced as the Ce content increases. The inhibition of austenite grain growth by fine Ce-containing inclusions during the holding process has been observed through laser scanning confocal microscopy (LSCM) and field-emission scanning electron microscope (FE-SEM) equipped with an energy dispersive spectrometer (EDS), and the pinning effect of Ce-containing inclusions on the austenite grain boundaries is the primary factor for the refinement of austenite grains. Besides, theoretical calculations have shown that the lattice misfits between the (100) plane of CeP and the (111) plane of the γ-phase is 7.83%, indicating that CeP could serve as a heterogeneous nucleation core for the γ-phase and was moderately effective. Furthermore, the uniformization effect of Ce on the grains is more prominent than the refining effect at the holding temperatures of 1000 °C and 1200 °C.