Influence of AR injection on shielding layer properties and surface protection from transient high heat loads under the QSPA plasma exposures

• Published in: Nuclear fusion 2024-05, Vol.64 (5), p.56010
• Main Authors: Garkusha, I.E., Makhlai, V.A., Herashchenko, S.S., Ladygina, M.S., Aksenov, N.N., Byrka, O.V., Petrov, Yu.V., Volkova, Y.E., Kulik, N.V., Staltsov, V.V., Yelisyeyev, D.V.
• Format: Article
• Language: English
• Subjects: energy transfer to the material surfaces; fusion reactor; plasma-surface interaction; QSPA plasma accelerator; simulators of transient loads; transient heat loads; vapour shield
• ISSN: 0029-5515; 1741-4326
• DOI: 10.1088/1741-4326/ad346d

The paper presents experimental studies of a shielding plasma layer formation in front of a tungsten surface exposed with hydrogen plasma in the QSPA-M test-bed facility under the conditions of additional seeding of argon (Ar) along the target surface into the zone of plasma-surface interaction. A pulsed gas injector on the base of a fast electromagnetic valve has been developed for the local injection of Ar. The injector is capable of generating a homogeneous argon gas flow with a maximum concentration above n Ar = 6 × 10 23 m −3 and a pulse duration of 0.5 ms. It is shown that the increase in the argon gas density in front of the surface leads to an essential decrease (in 1.5–2 times) in the energy load delivered to the target surface. In the presence of a strong magnetic field (up to 1 T), both the thickness of the shielding layer and the fraction of energy dissipated by the shield increase further. Even for moderate energy densities of the QSPA plasma streams in the experiments with Ar gas injection, less than 40% of the impacting plasma load is absorbed by the tungsten surface. The results demonstrate that this additional shielding attributed to the formation of a dense Ar plasma layer in front of the exposed W surface would be favourable for the divertor armour performance, causing the decreasing erosion of plasma-facing components in the course of transient events in a fusion reactor.