Measurements of Optical Properties of Smoke Particulates Produced from Burning Polymers and Their Implications

A series of cone calorimetry experiments and simultaneous gravimetric sampling and light extinction (GSLE) measurements were performed to determine the optical properties (light obscuration and extinction characteristics) of smoke particulates produced from burning polymers. The polymer selected in...

Full description

Saved in:
Bibliographic Details
Published in:Energies (Basel) 2020-05, Vol.13 (9), p.2299
Main Authors: Hong, Ter-Ki, Roh, Beom-Seok, Park, Seul-Hyun
Format: Article
Language:English
Subjects:
ABS resins
Acrylonitrile
Burning
Butadiene
Calorimetry
Combustion
Computer simulation
Decomposition
Extinction
fire
Gravimetry
Heat
Heat release rate
Heat transfer
Lasers
Light
light obscuration
mass specific extinction coefficient
Numerical analysis
Occultation
Optical properties
Particulates
polymer
Polymers
Polyvinyl chloride
Rigid PVC
Smoke
Smoke detectors
Styrene
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:A series of cone calorimetry experiments and simultaneous gravimetric sampling and light extinction (GSLE) measurements were performed to determine the optical properties (light obscuration and extinction characteristics) of smoke particulates produced from burning polymers. The polymer selected in the present study was acrylonitrile-butadiene styrene (ABS), which has a moderate smoke yield during combustion, and unplasticized polyvinyl chloride (UPVC), which has a lower smoke yield than ABS. The experiments show that the measured light obscuration for UPVC smoke particles is much lower than that for ABS smoke particles because of the low rate of smoke production during combustion. Results from the simultaneous GSLE measurements demonstrate more clearly that UPVC smoke particles represent a lower efficiency of light obscuration on a per-unit smoke mass basis, resulting in a 41.3% reduction in a mass specific extinction coefficient compared to the ABS smoke particles. Numerical analysis was performed to further elucidate the effect of optical properties on the smoke behavior using the Fire Dynamics Simulator (FDS) (Version 6.7.1, National Institute of Standards and Technology (NIST), Gaithersburg, MD, USA). The numerical results clearly demonstrated that the UPVC combustion, with its relatively low heat release rate and mass specific extinction coefficient, caused a significant delay in detecting a fire with a smoke detector compared to ABS combustion.
ISSN:1996-1073
1996-1073
DOI:10.3390/en13092299