FepiM: A Novel Inverse Piecewise Method to Determine Isothermal Flow Curves for Hot Working

• Published in: Metals (Basel ) 2021-04, Vol.11 (4), p.602
• Main Authors: Vuppala, Aditya, Krämer, Alexander, Lohmar, Johannes, Hirt, Gerhard
• Format: Article
• Language: English
• Subjects: Accuracy; Aluminum; Compression tests; copper ETP; cylindrical compression tests; Experiments; flow curve determination; Friction; Heat transfer; High temperature; Hot working; Interpolation; inverse modeling; Isothermal flow; Lubricants & lubrication; Metal forming; plastic deformation; Recrystallization; Simulation; stress–strain curve; Tables (data); Temperature; Temperature profiles; Tensile tests; Yield strength
• ISSN: 2075-4701; 2075-4701
• DOI: 10.3390/met11040602

In forming simulations, flow curves are cardinal inputs to predict features, such as forming forces and material flow. The laboratory-scale experiments to determine them, like compression or tensile tests, are affected by deformation heating, restricting direct flow curve determination. In principle, the current analytical and inverse methods determine flow curves from these tests, but while the analytical methods assume a simplified temperature profile, the inverse methods require a closed-form flow curve equation, which mostly cannot capture complex material behavior like multiple recrystallization cycles. Therefore, the inverse piecewise flow curve determination method “FepiM” previously developed and published by the current authors is extended by introducing a two-step procedure to obtain isothermal flow curves at elevated temperatures and different strain rates. Thereby, the flow curve is represented as tabular data instead of an equation to reproduce complex flow curve shapes while also compensating the effect of inhomogeneous temperature profiles on the flow stress. First, a flow curve at the highest temperature is determined. In the second step, using this first flow curve as a reference, the flow curves at lower temperatures are obtained via interpolation. Flow curves from conventional compression tests for aluminum and copper in the temperature range of 20–500 °C are predicted, and it is shown that these flow curves can reproduce the experimental forces with a maximum deviation of less than 1%. Therefore, the proposed new piecewise method accurately predicts isothermal flow curves for compression tests, and the method could be further extended to highly inhomogeneous methods in the future.