Optimizing production efficiencies of hot water units using building energy simulations - Trade-off between Legionella pneumophila contamination risk and energy efficiency

• Published in: E3S web of conferences 2019-01, Vol.111, p.4053
• Main Authors: Van Kenhove, Elisa, De Backer, Lien, Laverge, Jelle
• Format: Article
• Language: English
• Subjects: Airtightness; Case studies; Computer simulation; Contamination; Controllers; Drinking water; Energy; Energy conservation; Energy consumption; Energy demand; Energy efficiency; Heat; Heat exchangers; Heat pumps; Heating systems; High temperature; Hot water heating; Legionella pneumophila; Legionnaires' disease bacterium; Residential energy; Risk reduction; Solar collectors; Temperature; Temperature effects; Water heating
• ISSN: 2267-1242; 2555-0403; 2267-1242
• DOI: 10.1051/e3sconf/201911104053

The energy needed for domestic hot water represents an important share in the total energy use of well-insulated and airtight buildings. One of the main reasons for this high energy demand is that hot water is produced at temperatures above 60°C to mitigate the risk of contaminating the hot water system with Legionella pneumophila . However, this elevated temperature is not necessary for most domestic hot water applications, and has a negative effect on the efficiency of hot water production units. A simulation model has been developed which proposes an alternative to this constant 60°C by predicting the Legionella pneumophila concentration dynamically throughout the hot water system. Based on this knowledge, a hot water controller is added to the simulation model that sets a lower hot water comfort temperature in combination with heat shocks. In this paper, the simulation model is used to estimate the energy saving potential in a case study building, at the level of the heat production system by reaching higher production efficiencies. Three different production units, namely an electric boiler, heat pump and solar collector have been investigated. The controller is expected to become an alternative for the current, energy intensive, high temperature tap water heating systems.