Standalone Containment Analysis of Four Phébus Tests with the ASTEC and the MELCOR Codes

• Published in: Science and technology of nuclear installations 2019, Vol.2019 (2019), p.1-19
• Main Authors: Gonfiotti, Bruno, Paci, Sandro
• Format: Article
• Language: English
• Subjects: Aerosols; Atmosphere; Atmospheric models; Bundling; Codes; Computational fluid dynamics; Computer simulation; Containment; Control rods; Coupling; Degradation; Experiments; Fission products; Fluid flow; Hydraulics; Iodine; Nuclear fuels; Nuclear power plants; Nuclear reactors; Oxidation; Pressurized water reactors; Primary circuits; Stainless steel
• ISSN: 1687-6075; 1687-6083
• DOI: 10.1155/2019/6021346

After the severe accident (SA) occurred at the Three-Miles Island Nuclear Power Plant (NPP), important efforts on the investigation of the different phenomena during this kind of accidents have been started. Several experimental campaigns investigating one phenomenon at time or the combination of two or more phenomena have been performed. Today, the Phébus experimental campaign is probably the most important activity on the evaluation of the coupling among different phenomena. Four out of five tests investigated the degradation of an intact Pressurized Water Reactor (PWR) fuel bundle and the subsequent transport of Fission Products (FP) and Structural Materials (SM) through the primary circuit and into the containment, while the fifth test was only the degradation of a bed of PWR fuel bundle debris. These tests were performed between 1990 and 2010 at the CEA Cadarache laboratories (France) in a 5000:1 scaled facility. The main four tests varied the employed control rod materials, the fuel burn-up, and the oxidizing conditions of the atmosphere (strongly or weakly). The outcomes of this experimental campaign created a solid base for the understanding of the involved phenomena and allowed the development of models and software codes capable of simulating the evolution of a SA in a real NPP. ASTEC and MELCOR were two of the main SA codes profiting from the results of this Phébus campaign. These two codes were further improved in the latest years to account for the findings obtained in more recent experimental campaigns. A continuous verification and validation work is then necessary to check how the newer code’s versions reproduce the tests performed in these older experimental campaigns such as Phébus one. The present work is intended to be the final step of a series of publications covering the activities carried out at University of Pisa with the ASTEC and the MELCOR SA codes on the four Phébus tests employing an intact PWR fuel bundle. Because of the complexity and the extent of these tests, only the containment aspects were considered in the precedent works, i.e., only the thermal-hydraulics transient and its coupling with the FP and SM behavior. Then, general conclusions based on the outcomes of these precedent works are summarized in this work.