Walnut and Hazelnut Shells: Untapped Industrial Resources and Their Suitability in Lignocellulosic Composites

• Published in: Applied sciences 2020-09, Vol.10 (18), p.6340
• Main Authors: Barbu, Marius Cătălin, Sepperer, Thomas, Tudor, Eugenia Mariana, Petutschnigg, Alexander
• Format: Article
• Language: English
• Subjects: Absorption; Adhesives; Bend strength; Brinell hardness; Crop residues; Hardness; hazelnut; Hazelnuts; Lignocellulose; lignocellulosic composites; Mechanical properties; Melamine; Modulus of elasticity; Moisture content; Nutshells; Particle board; Physical properties; Polyurethane; Polyurethane resins; PUR; Raw materials; Shells; Swelling; Thickness; Urea; walnut; Walnuts; Water absorption; Water uptake; Wood
• ISSN: 2076-3417; 2076-3417
• DOI: 10.3390/app10186340

Walnut and hazelnut shells are agricultural by-products, available in high quantities during the harvest season. The potential of using these two agricultural residues as raw materials in particleboard production has been evaluated in this study. Different panels with either walnut or hazelnut shells in combination with melamine-urea formaldehyde or polyurethane at the same level of 1000 kg/m3 density were produced in a laboratory hot press and mechanical properties (modulus of elasticity, bending strength, and Brinell hardness) and physical properties (thickness swelling and water absorption) were determined, together with formaldehyde content. Although Brinell hardness was 35% to 65% higher for the nutshell-based panels, bending strength and modulus of elasticity were 40% to 50% lower for the melamine-urea formaldehyde bonded nutshells compared to spruce particleboards, but was 65% higher in the case of using polyurethane. Water absorption and thickness swelling could be reduced significantly for the nutshell-based boards compared to the spruce boards (the values recorded ranged between 58% to 87% lower as for the particleboards). Using polyurethane as an adhesive has benefits for water uptake and thickness swelling and also for bending strength and modulus of elasticity. The free formaldehyde content of the lignocellulosic-based panels was included in the E0 category (≤2.5 mg/100 g) for both walnut and hazelnut shell raw materials and the use of polyurethane improved these values to super E0 category (≤1.5 mg/100 g).