Unveiling the mechanical response and accommodation mechanism of pre-rolled AZ31 magnesium alloy under high-speed impact loading

• Published in: Journal of magnesium and alloys 2022-04, Vol.10 (4), p.1096-1108
• Main Authors: Liu, Xiao, Yang, Hui, Zhu, Biwu, Wu, Yuanzhi, Liu, Wenhui, Tang, Changping
• Format: Article
• Language: English
• Subjects: Accommodation mechanism; High-speed impact loading; Mechanical response; Pre-rolled AZ31 magnesium alloy; Pre-twinning
• ISSN: 2213-9567; 2213-9567
• DOI: 10.1016/j.jma.2021.07.030

Split Hopkinson pressure bar (SHPB) tests were conducted on pre-rolled AZ31 magnesium alloy at 150–350 ℃ with strain rates of 2150s-1, 3430s-1 and 4160s-1. The mechanical response, microstructural evolution and accommodation mechanism of the pre-rolled AZ31 magnesium alloy under high-speed impact loading were investigated. The twin and shear band are prevailing at low temperature, and the coexistence of twins and recrystallized grains is the dominant microstructure at medium temperature, while at high temperature, dynamic recrystallization (DRX) is almost complete. The increment of temperature reduces the critical condition difference between twinning and DRX, and the recrystallized temperature decreases with increasing strain rate. The mechanical response is related to the competition among the shear band strengthen, the twin strengthen and the fine grain strengthen and determined by the prevailing grain structure. The fine grain strengthen could compensate soften caused by the temperature increase and the reduction of twin and shear band. During high-speed deformation, different twin variants, introduced by pre-rolling, induce different deformation mechanism to accommodate plastic deformation and are in favor for non-basal slip. At low temperature, the high-speed deformation is achieved by twinning, dislocation slip and the following deformation shear band at different deformation stages. At high temperature, the high-speed deformation is realized by twinning and dislocation slip of early deformation stage, transition shear band of medium deformation stage and DRX of final deformation stage.