Optimisation of Stingless Bee Honey Nanoemulsions Using Response Surface Methodology

• Published in: Foods 2021-09, Vol.10 (9), p.2133
• Main Authors: Rozman, Azri Shahir, Hashim, Norhashila, Maringgal, Bernard, Abdan, Khalina
• Format: Article
• Language: English
• Subjects: Antimicrobial agents; Bees; Cosmetics; Distilled water; Energy; Factorial design; Food; Food industry; Food science; Fourier analysis; Fourier transforms; Functional groups; Glycerol; high-pressure homogeniser; Homogenization; Honey; Image transmission; Independent variables; Infrared analysis; Infrared spectroscopy; Morphology; Nanoemulsions; Oleic acid; Optimization; Particle size; Pharmaceutical industry; Polydispersity; Pressure; Response surface methodology; Shelf life; Stability analysis; stingless bee honey; Storage temperature; Surfactants; Transmission electron microscopy; Viscosity
• ISSN: 2304-8158; 2304-8158
• DOI: 10.3390/foods10092133

Nanoemulsions (NEs) have been used in a wide range of products, such as those produced by the food, cosmetics, and pharmaceutical industries, due to their stability and long shelf life. In the present study, stingless bee honey (SBH) NEs were formulated using SBH, oleic acid, tween 80, glycerol, and double-distilled water. SBH NEs were prepared using a high-pressure homogeniser and were characterised by observing their stability and droplet size. Fourier Transform-Infrared (FTIR) analysis was used to observe the functional groups of the SBH NEs after being subjected to high-pressure homogenisation. Transmission Electron Microscopy (TEM) images were then used to confirm the particle size of the SBH NEs and to investigate their morphology. The effects of the independent variables (percentage of oleic acid, storage time, and storage temperature) on the response variables (particle size and polydispersity index) were investigated using the response surface methodology, along with a three-level factorial design. The results showed that the models developed via the response surface methodology were reliable, with a coefficient of determination (R2) of more than 0.90. The experimental validation indicated an error of less than 10% in the actual results compared to the predicted results. The FTIR analysis showed that SBH NEs have the same functional group as SBH. Observation through TEM indicated that the SBH NEs had a similar particle size, which was between 10 and 100 nm. Thus, this study shows that SBH NEs can be developed using a high-pressure homogeniser, which indicates a new direction for SBH by-products.