Transient cooling of two circular cylinders arranged in Tandem an bounded by an adiabatic wall

• Published in: Journal of Mechanical Engineering and Sciences 2021-12, Vol.15 (4), p.8580-8591
• Main Authors: Saeid, Nawaf Hazim, N. Hasan, Seri Rahayu Ya'akob, S. Shuib
• Format: Article
• Language: English
• Subjects: Adiabatic flow; Carbon steels; cfd simulations; Circular cylinders; Conduction heating; conjugate heat transfer; Cooling; Cross flow; Fluid dynamics; Fluid flow; Laminar flow; Parameters; Plywood; Reynolds number; Separation; tandem arrangement; thermal inertia; Thermodynamic properties; Transient analysis
• ISSN: 2289-4659; 2231-8380
• DOI: 10.15282/jmes.15.4.2021.10.0676

Parametric study is carried out on the transient cooling process of two circular cylinders in tandem arrangement for a specified period of time. Transient analysis of conjugate (conduction and convection) heat dissipation from two identical cylinders is considered with various parameters. The two cylinders of same size and properties are bounded by an adiabatic flat wall from below and the cooling air is flowing normal to their axis (cross flow). The following parameters are investigated in the present study: Reynolds number, cylinders thermal properties, separation distance between the two cylinders and the cooling time. The laminar flow is considered with Reynolds number values from 50 to 500. The simulations are carried out for cooling the two cylinders made of carbon steels, plastics plexiglass and plywood. The local and average Nusselt number for both steady and transient cooling of the two cylinders are presented. The effects of the parameters are investigated and the results are presented to understand the process. It is found that increasing either the separation distance and/or the Reynolds number will increase the heat dissipation and reduce the cooling time. The results show that carbon steels cylinders need longer time of cooling compare with the plywood cylinders due to the difference in their thermal inertia.