Metal Hydride Beds-Phase Change Materials: Dual Mode Thermal Energy Storage for Medium-High Temperature Industrial Waste Heat Recovery

• Published in: Energies (Basel) 2019-10, Vol.12 (20), p.3949
• Main Authors: Nyamsi, Serge Nyallang, Tolj, Ivan, Lototskyy, Mykhaylo
• Format: Article
• Language: English
• Subjects: Carbonates; Configuration management; Design optimization; Energy efficiency; Energy management; Energy recovery; energy recovery efficiency; Energy storage; Exergy; Flux density; Generators; Heat; Heat conductivity; Heat exchangers; Heat of fusion; Heat recovery; Heat recovery systems; Heat storage; Heat transfer; High temperature; Hydrates; Hydrogen; Hydroxides; Indicators; Industrial plants; industrial waste heat recovery; Industrial wastes; Latent heat; Low temperature; Lymphocytes T; Melt temperature; Melting points; Metal hydrides; Metals; Payback periods; phase change material; Phase change materials; Phase transitions; Physical properties; Power efficiency; Power plants; Simulation; Solar power; Storage systems; Thermal conductivity; Thermal energy; thermal energy storage; Thermal pollution; Two dimensional models; Waste heat
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en12203949

Heat storage systems based on two-tank thermochemical heat storage are gaining momentum for their utilization in solar power plants or industrial waste heat recovery since they can efficiently store heat for future usage. However, their performance is generally limited by reactor configuration, design, and optimization on the one hand and most importantly on the selection of appropriate thermochemical materials. Metal hydrides, although at the early stage of research and development (in heat storage applications), can offer several advantages over other thermochemical materials (salt hydrates, metal hydroxides, oxide, and carbonates) such as high energy storage density and power density. This study presents a system that combines latent heat and thermochemical heat storage based on two-tank metal hydrides. The systems consist of two metal hydrides tanks coupled and equipped with a phase change material (PCM) jacket. During the heat charging process, the high-temperature metal hydride (HTMH) desorbs hydrogen, which is stored in the low-temperature metal hydride (LTMH). In the meantime, the heat generated from hydrogen absorption in the LTMH tank is stored as latent heat in a phase change material (PCM) jacket surrounding the LTMH tank, to be reused during the heat discharging. A 2D axis-symmetric mathematical model was developed to investigate the heat and mass transfer phenomena inside the beds and the PCM jacket. The effects of the thermo-physical properties of the PCM and the PCM jacket size on the performance indicators (energy density, power output, and energy recovery efficiency) of the heat storage system are analyzed and discussed. The results showed that the PCM melting point, the latent heat of fusion, the density and the thermal conductivity had significant impacts on these performance indicators.