Description of the Sacropelvic Parameters Measurement Method for S2-alar iliac Screw Insertion

• Published in: Revista brasileira de ortopedia 2020-12, Vol.55 (6), p.702-707
• Main Authors: de Sousa Pontes, Mariana Demétrio, Ismael, Lucas Klarosk, Francisco, Lucas Américo, Herrero, Carlos Fernando Pereira da Silva
• Format: Article
• Language: English
• Subjects: Artigo Original; ORTHOPEDICS; sacroiliac joint; sacrum; spine
• ISSN: 0102-3616; 1982-4378; 1982-4378
• DOI: 10.1055/s-0040-1713163

Description of the sacropelvic parameters measurement method for S2-alar iliac (S2AI) screw insertion.  Descriptive study of the method for measuring sacropelvic parameters for the insertion of the S2AI screw using computed tomography (CT). The data evaluated in multiplanar reconstructions were the parameters of the screw trajectory, including length, diameter and angles of the trajectory in the axial and sagittal planes.  From the sagittal reconstruction, the axis of the series of axial slices is angled three-dimensionally so that it is possible to visualize the S2 vertebra, the screw entry point, and the anteroinferior iliac spine (AIIS) in the same plane. The entry point is demarcated at the midpoint between the dorsal foramina of S1 and S2. To measure the length of the screw, lines are drawn tangent to the inner and outer cortices of the iliac. The diameter is determined by the shortest distance between the inner and outer iliac faces minus half of the diameter of the screw chosen medially and laterally. The path angle in the axial plane is formed by the anteroposterior midline of the sacrum and the line of the screw length. The craniocaudal inclination angle in relation to the S1 plateau corresponds to the degree of inclination made in the sagittal plane to find the image in which the entry point and the AIIS are seen in the same plane.  It was possible to adequately assess, through multiplanar CT reconstructions, the sacropelvic parameters necessary for the safe insertion of the S2AI screw.