Simulation of Landing and Take-Off Noise for Supersonic Transport Aircraft at a Conceptual Design Fidelity Level

• Published in: Aerospace 2022-01, Vol.9 (1), p.9
• Main Author: Berton, Jeffrey J
• Format: Article
• Language: English
• Subjects: Accuracy; Acoustics; Aeronautics (General); Aerospace engineering; Aircraft; Aircraft accidents & safety; Aircraft design; Aircraft noise; aircraft noise prediction; Aviation; Certification; Civil aviation; conceptual aircraft design; Conceptual design; Design; Engine design; Engine noise; Flight simulation; ICAO Annex 16; Microprocessors; NASA STCA; noise certification; Noise levels; Noise prediction (aircraft); Regulations; Shielding; Simulation; Supersonic aircraft; supersonic transport aircraft; Supersonic transports; Takeoff noise; Transport aircraft; Transportation noise; Vehicles; Verification
• ISSN: 2226-4310; 2226-4310
• DOI: 10.3390/aerospace9010009

The German Aerospace Center has launched an internal project to assess the noise impact associated with supersonic transport aircraft during approach and departure. A dedicated simulation process is established to cover all relevant disciplines, i.e., aircraft and engine design, engine installation effects, flight simulation, and system noise prediction. The core of the simulation process is comprised of methods at the complexity and fidelity level of conceptual aircraft design, i.e., typical overall aircraft design methods and a semi-empirical approach for the noise modeling. Dedicated interfaces allow to process data from high fidelity simulation that will support or even replace initial low fidelity results in the long run. All of the results shown and discussed in this study are limited to the fidelity level of conceptual design. The application of the simulation process to the NASA 55t Supersonic Technology Concept Aeroplane, i.e., based on non-proprietary data for this vehicle, yields similar noise level predictions when compared to the published NASA results. This is used as an initial feasibility check of the new process and confirms the underlying methods and models. Such an initial verification of the process is understood as an essential step due to the lack of available noise data for supersonic transport aircraft in general. The advantageous effect of engine noise shielding on the resulting system noise is demonstrated based on predicted level time histories and certification noise levels. After this initial verification, the process is applied to evaluate a conceptual supersonic transport design based on a PhD thesis with two engines mounted under the wing, which is referred to as aircraft TWO. Full access to this vehicle’s design and performance data allows to investigate the influence of flight procedures on the resulting noise impact along approach and departure. These noise results are then assembled according to proposed Federal Aviation Agency regulations in their Notice of Proposed Rulemaking, e.g., speed limitations, for Supersonic transport noise certification and the regulations from Noise Chapters of the Annex 16 from the International Civil Aviation Organization in order to evaluate the resulting levels as a function of the flight procedure.