Centrifuge tests on the deformation law of pipelines crossing slopes with different water contents

• Published in: Scientific reports 2024-08, Vol.14 (1), p.19466-21
• Main Authors: Jia, Haidong, Yang, Ming, Dai, Lianshuang, Que, Yongbing, Wang, Dongyuan, Yu, Zhifeng, Zhao, Yu, Hu, Wenjun, Xu, Junkai, Tang, Junfeng
• Format: Article
• Language: English
• Subjects: 639/166/986; 704/4111; Centrifuges; Deformation; Earth pressure; Emergency preparedness; Humanities and Social Sciences; Landslides; Mathematical models; Moisture content; multidisciplinary; Science; Science (multidisciplinary); Strain; Water content
• ISSN: 2045-2322; 2045-2322
• DOI: 10.1038/s41598-024-70372-z

The deformation law of pipelines crossing landslide areas is an important prerequisite for the scientific design of pipelines. Most current studies find it difficult to simulate the real stress and strain state of pipelines on site. This study conducted two centrifuge model tests to observe pipeline failure indicators (deformation, stress, strain) and slope failure indicators (crack width, soil pressure, landslide displacement) in response to changes in acceleration. The experimental findings align with the results obtained from numerical simulations. The findings indicate that slope failure with high moisture content is more serious. At a moisture content of 15%, the slope has a maximum displacement of 70 mm in close reach to the buried pipeline. The pipeline has a “bimodal distribution” of strain along its axial length. The largest amount of deformation occurs at a distance of L/4 from the center of the pipeline, and the deformation value is 9000 με. Moreover, the maximum deformation in the mid-span is 21 mm, which corresponds to the result accumulated from the numerical simulation. Thus, the pipeline needs to improve the disaster prevention capabilities at the mid-span and L/4 of the pipeline.