Microstructure and pitting corrosion of shielded metal arc welded high nitrogen stainless steel

• Published in: Defence technology 2015-09, Vol.11 (3), p.237-243
• Main Authors: Raffi Mohammed, Madhusudhan Reddy, G., Srinivasa Rao, K.
• Format: Article
• Language: English
• Subjects: Cromang–N (Cr–Mn–N); Energy back scattered diffraction (EBSD); Field emission scanning electron microscopy (FESEM); High nitrogen austenitic stainless steels (HNSs); Shielded metal arc welding (SMAW)
• ISSN: 2214-9147; 2214-9147
• DOI: 10.1016/j.dt.2015.04.002

The present work is aimed at studying the microstructure and pitting corrosion behaviour of shielded metal arc welded high nitrogen steel made of Cromang-N electrode. Basis for selecting this electrode is to increase the solubility of nitrogen in weld metal due to high chromium and manganese content. Microscopic studies were carried out using optical microscopy (OM) and field emission scanning electron microscopy (FESEM). Energy back scattered diffraction (EBSD) method was used to determine the phase analysis, grain size and orientation image mapping. Potentio-dynamic polarization testing was carried out to study the pitting corrosion resistance in aerated 3.5% NaCl environment using a GillAC electrochemical system. The investigation results showed that the selected Cr–Mn–N type electrode resulted in a maximum reduction in delta-ferrite and improvement in pitting corrosion resistance of the weld zone was attributed to the coarse austenite grains owing to the reduction in active sites of the austenite/delta ferrite interface and the decrease in galvanic interaction between austenite and delta-ferrite.